Evaluasi Pengujian Kekerasan Material Aisi 4140 Menggunakan Full Factorial Design Of Experiment

Abstract

Experiment is looking at the influence of dimensions, heat treatment temperature and cooling media effect linearly on hardness, tensile strength steel AISI 4140 so that the level comparison of the hardness of influence on the diameter variation (input effects the response). The Full Factorial Design of Experiment Method is used to assess the results of the hardness test in accordance with the testing hypothesis. Design of Experiment (DOE) has been widely used to determine design factors that significantly influence target responses and build empirical models that represent relationships between significant factors. Reviewing the literature revealed that the majority of researchers explored various DOE. Response Tempering heat treatment with Quenching Oil media, this study used AISI 4140 material with a diameter of 29 mm, 33 mm and 35 mm. Results AISI 4140 of commercial production by partial cutting are then taken for hardness testing. The Full Factorial Design of Experiment Method is used to assess the results of the hardness test in accordance with the hypothesis according to the analysis of variance(Anova). The response of the hardness test data input in the 30 0 & 90 0 direction is not influenced by the AISI 4140 material dimensions and the direction of the test surface data retrieval.

Analysis of Prototype Electric Car Chassis Construction using Aluminum Hollow 6061 Profiles using Inventor Software 2016

“…This study has a formulation of the problem, namely, what are the results of Von Mises Stress, displacement and safety factor from the three existing chassis patterns and which model is the best chassis pattern theoretically and analytically (Toteles and Alhaffis, 2021;Dudescu, Bere and Neamțu, 2022;Weriono and Siregar, 2023). This study aims to determine the comparative analysis value of 3 different chassis constructions with the same material and using the same aluminum hollow.…”