Estimation of loads on a horizontal axis wind turbine operating in yawed flow conditions

Abstract

Stereoscopic particle image velocimetry (SPIV) has been used to characterize the flow around the blade of a yawed horizontal axis wind turbine model. The goal was to assess the possibility of obtaining the 3D velocity field around the blade, the pressure distribution, and the aerodynamic loads being exerted on the blade under unsteady flow conditions. The SPIV equipment was mounted on a traverse system and provided with phase‐locked velocity planes perpendicular to the blade axis, scanning the blade from the root to the tip, at three different azimuthal positions, so as to have information of the time variation of the flow. The pressure distribution and the aerodynamic loads on each plane were obtained via 3D formulation. Main differences encountered when measuring loads in yawed flow compared with axial flow have been discussed. Finally, the consistency of the results with similar results obtained computationally with a panel model was assessed. The proposed methodology presents one step further in the application of SPIV to measure forces on a horizontal axis wind turbine, assessing the possibility of estimating the blade loads when the turbine is operating under non‐axial flow conditions, with the goal of better simulating real working operating regimes in a wind farm, where the flow is typically not uniform. The proposed methodology could be developed and used to better understand relevant wind energy issues such as dynamic loading and active load control efficiency, in the future. The processed and averaged flow fields from the experimental SPIV data are made available online to the reader. See appendix for description of the files. Copyright © 2014 John Wiley & Sons, Ltd.

Evaluation of different methods for determining the angle of attack on wind turbine blades with CFD results under axial inflow conditions

“…An example is the EU project AVATAR [14], which aims at improving and validating aerodynamic models, and to ensure their applicability for designing 10MW+ turbines [13]. One could think of improving the accuracy of these correction models for the BEM codes from measurements using hot wires or Particle Image Velocimetry (PIV) [15,16,17,18]. However, these measurements are very expensive in terms of both time and cost and there are often limited by spatial and temporal resolutions.…”

Computational Modelling of Materials for Wind Turbine Blades: Selected DTU Wind Energy Activities

“…In this section, a simple method to estimate loads on the wind blades is presented. There exist a number of studies estimating the loads on wind blades from aerodynamic, physical loads [ 2 , 3 , 4 , 5 ]. However, in this work, we seek to develop a simple, beam model-based approach, which can be introduced in the complex materials model as a boundary condition.…”

A Review of Wind Turbine Yaw Aerodynamics

“…Lately, the loads on a yawed wind turbine have been established directly through stereo particle image (SPIV) measurements (see [39]) and reported in [40,41], but these are limited to only one blade position, thus not allowing for establishing the time variation of the blade loads in yaw. Local inflow angle for the NREL UAE rotor at 45° yaw and 7 m/s wind speed.…”