Estimating joint movements from observed EMG signals with multiple electrodes under sensor failure situations toward safe assistive robot control

Abstract

In this paper, we propose an estimation method of human joint movements from measured EMG signals for assistive robot control. We focus on how to estimate joint movements using multiple EMG electrodes even under sensor failure situations. In real world applications, EMG sensor electrodes might become disconnected or detached from skin surfaces. If we consider EMG-based robot control for assistive robots, such sensor failures lead to significant errors in the estimation of user joint movements. To cope with these sensor failures, we propose a state estimation model that takes uncertain observations into account. Sensor channel anomalies are found by checking the covariance of the EMG signals measured by multiple EMG electrodes. To validate the proposed control framework, we artificially disconnect an EMG electrode or detach one side of an EMG probe from the skin surface during elbow joint movement estimation. We show proper control of a one-DOF exoskeleton robot based on the estimated joint torque using our proposed method even when one EMG electrode has a sensor problem; a standard method with no tolerability against uncertain observations was unable to deal with these fault situations. Furthermore, the errors of the estimated joint torque with our proposed method were smaller than the standard method or a method with a conventional sensor fault detection algorithm.

A Multimodal Anomaly Detector for Robot-Assisted Feeding Using an LSTM-Based Variational Autoencoder

“…Many classic machine learning approaches have also been used: support vector machine (SVM) [9], [10], self-organizing map (SOM) [11], k-nearest neighbors (kNN) [12], etc. To detect anomalies from time-series signals, researchers have also used hidden Markov models [3] or Kalman filters [13].…”

Monitoring Active Patient Participation During Robotic Rehabilitation: Comparison Between a Robot-Based Metric and an EMG-Based Metric

“…As introduced above, EMG measurements have been used by a number of research groups to estimate joint torques, also in the context of robotic support with AAN control algorithms [31], [32]. For example, by using EMG measurement data as an input for computational models of the musculoskeletal system, the actual joint torque may be estimated, which may then be used to derive the deficient joint torque [33].…”

An Optimal Assistive Control Strategy based on User's Motor Goal Estimation

“…This tendency was seen in other subjects as well. Therefore, it was shown that the estimated goal label ŷ can be used as a user's motor goal calculated by (3). In this study, based on these results, we set the user's motor goal for the 1 m goal shot as w 1 = 1 − w 2 and the 3 m goal shot as w 2 = 1 1+exp(−aŷ−b) .…”

“…Because of the recent progress in robotics technologies, wearable robots, such as exoskeleton robots, are expected to physically interact with and assist humans in their activities. As proof-of-principle, the hand exoskeleton [1], [2], and upper and lower-body exoskeleton robots [3], [4], [5] have been studied. For these applications, the use of surface electromyography (EMG) can be a possible approach to intuitively control the robots by estimating the user's movement intention [6], [7].…”