Error analysis and correction strategy for measuring oriented silicon steel by SST method

Abstract

To accurately determine the relationship between magnetic polarisation and magnetic field strength in oriented silicon steel, the magnetic properties, such as power loss, were measured under different magnetisation conditions. This facilitates for the precise selection of iron core materials for distribution transformers. The deviation rate of measurement results for different magnetisation conditions in oriented silicon steel with varying thicknesses was analysed using the SST method. Additionally, the finite element simulation of MagNet was employed to further investigate this relationship. The causes of measurement errors in oriented silicon steel by the SST method are thoroughly studied, with a focus on 0.18 mm oriented silicon steel as an example. It is found that the main reason for the measurement error is the deviation between the actual effective magnetic path length and the conventional effective magnetic path length, which is caused by the uneven distribution of magnetic polarisation in oriented silicon steel. The main reason for the difference of magnetisation conditions is the change in the actual effective magnetic path length, which is mainly affected by changes in permeability. Combined with the magnetic field distribution inside the oriented silicon steel, the distribution coefficient of magnetic polarisation can be calculated, the actual effective magnetic path length under each condition can be calculated, and then the measurement results of the SST method can be modified. This research is expected to significantly contribute to the practical applications of oriented silicon steel in engineering.