Enhancing Structural Properties and Performance of Graphene-Based Devices Using Self-Assembled HMDS Monolayers

Abstract

The performance of graphene devices is often limited by defects and impurities induced during device fabrication. Polymer residue left on the surface of graphene after photoresist processing can increase electron scattering and hinder electron transport. Furthermore, exposing graphene to plasma-based processing such as sputtering of metallization layers can increase the defect density in graphene and alter the device performance. Therefore, the preservation of the high-quality surface of graphene during thin-film deposition and device manufacturing is essential for many electronic applications. Here, we show that the use of self-assembled monolayers (SAMs) of hexamethyldisilazane (HMDS) as a buffer layer during the device fabrication of graphene can significantly reduce damage, improve the quality of graphene, and enhance device performance. The role of HMDS has been systematically investigated using surface analysis techniques and electrical measurements. The benefits of HMDS treatment include a significant reduction in defect density compared with as-treated graphene and more than a 2-fold reduction of contact resistance. This surface treatment is simple and offers a practical route for improving graphene device interfaces, which is important for the integration of graphene into functional devices such as electronics and sensor devices.

On-chip integrated graphene aptasensor with portable readout for fast and label-free COVID-19 detection in virus transport medium

“… 14 Graphene growth via chemical vapour deposition and subsequent transfer onto large-area silicon wafers has steadily advanced, allowing the large scale production of sensor devices using CMOS-compatible wafer-scalable processes. 15 Along with scalable semiconductor manufacturing techniques that enable a dramatic miniaturization of chip footprints without sacrificing performance, the implementation of disposable sensor chips at low cost with multi-target detection capability is now realistic. Since the power consumption per GFET is of the order of microwatts, portable and battery-powered sensor readout devices 14 for multiple chips should enable use at points-of-care and checkpoints or in the home.…”

Application of Molecular Vapour Deposited Al2O3 for Graphene-Based Biosensor Passivation and Improvements in Graphene Device Homogeneity

“…As a result, there can be residual photoresist residue present on the graphene surface after processing [ 67 ]. For biosensing purposes, this negatively impacts device fabrication consistency as it reduces the available graphene surface area and causes electron scattering, hindering the graphene electron mobility [ 68 , 69 , 70 ]. The presence of trace photoresist residue results in a wider range of I D /I G values and a higher average I D /I G .…”

The New Materials for Battery Electrode Prototypes

“…The use of graphene as a building material for battery components can improve the electrical properties and provide an excellent chemical stability to the battery [ 5 ]. Graphene has high electrical and thermal conductivity values that allow for the transport and mobility of metal ions and electrons within its structure [ 6 , 7 ]. However, graphene has a unique electronic structure where the valence and conduction bands of graphene touch at the cones of the hexagonal Brillouine zone (K point) which forms a Dirac point so that graphene has no energy gap (band gap).…”