Enhancing Coiled Tubing Offshore Operating Limit Case Study

Abstract

Coiled tubing (CT) is being increasingly used in open water mode for offshore light well intervention such as subsea hydraulic pumping applications. Traditionally coiled tubing has been popular in land based intervention applications; whereas for offshore applications using a CT deployed through a riser (in-riser mode) is very common. However more recently, light well intervention (LWI) operations with CT deployed in open water mode are gaining traction due to improved efficiencies compared to traditional intervention methods. Coiled tubing systems are an integral part of a LWI system and are used for injection and hydraulic pumping operations. In open water mode coiled tubing pipe is susceptible to direct hydrodynamic loading from waves and currents and vessel motions. The strength response and fatigue performance of the coiled tubing pipe can severely limit operability and increase down time for these operations when compared to riser based operations. In this paper we will present a case study where coiled tubing has been used for LWI and subsea pumping operations. The paper will highlight some of the key challenges in design and operation of open water mode CT systems for offshore applications, from a loading standpoint and will also discuss challenges arising from lack of industry standards and codes. Analysis methodology and outcomes from this study will be presented to demonstrate how the CT strength response limits operations. Multiple mitigation options that were used to enhance operability will be discussed: these include judicious use of operational parameters, field measurement based environmental data and pipe depressurization to attain feasibility in harsh environments. In addition, modeling refinements based on 3 Dimensional (3D) Finite Element Analysis (FEA) of the CT injector guides and strain based design criteria will be discussed. The paper will include recommendations based on experience from these case studies and highlight the need for a common industry standard to better assist Operators and OEMs with future designs.