Enhancement of polyunsaturated fatty acid production by cerulenin treatment in polyunsaturated fatty acid-producing bacteria

The marine organism Moritella marina MP-1 produces the polyunsaturated fatty acid docosahexaenoic acid (DHA). While the basic metabolic pathway for DHA production in this organism has been identified, the impact of growth conditions on DHA production is largely unknown. This study examines the effect of supplemental carbon, nitrogen and salts, growth temperature and media composition and pH on DHA and biomass production and the fatty acid profile. The addition of supplemental nitrogen significantly increased the overall DHA titer via an increase in biomass production. Supplemental glucose or glycerol increased biomass production, but decreased the amount of DHA per biomass, resulting in no net change in the DHA titer. Acidification of the baseline media pH to 6.0 increased DHA per biomass. Changes in growth temperature or provision of supplemental sodium or magnesium chloride did not increase DHA titer. This organism was also shown to grow on defined minimal media. For both media types, glycerol enabled more DHA production per biomass than glucose. Combination of these growth findings into marine broth supplemented with glycerol, yeast extract, and tryptone at pH 6.0 resulted in a final titer of 82 Â± 5 mg/L, a nearly eightfold increase relative to the titer of 11 Â± 1 mg/L seen in the unsupplemented marine broth. The relative distribution of other fatty acids was relatively robust to growth condition, but the presence of glycerol resulted in a significant increase in myristic acid (C14:0) and decrease in palmitic acid (C16:0). In summary, DHA production by M. marina MP-1 can be increased more than fivefold by changing the growth media. Metabolic engineering of this organism to increase the amount of DHA produced per biomass could result in additional increases in titer. ABSTRACTThe marine organism Moritella marina MP-1 produces the polyunsaturated fatty acid docosahexaenoic acid (DHA). While the basic metabolic pathway for DHA production in this organism has been identified, the impact of growth conditions on DHA production is largely unknown. This study examines the effect of supplemental carbon, nitrogen and salts, growth temperature and media composition and pH on DHA and biomass production and the fatty acid profile. The addition of supplemental nitrogen significantly increased the overall DHA titer via an increase in biomass production. Supplemental glucose or glycerol increased biomass production, but decreased the amount of DHA per biomass, resulting in no net change in the DHA titer.Acidification of the baseline media pH to 6.0 increased DHA per biomass. Changes in growth temperature or provision of supplemental sodium or magnesium chloride did not increase DHA titer. This organism was also shown to grow on defined minimal media. For both media types, glycerol enabled more DHA production per biomass than glucose. Combination of these growth findings into marine broth supplemented with glycerol, yeast extract and tryptone at pH 6.0 resulted in a final titer of 82+5 mg/L, a nearly 8-fold increase...

Section: Discussionmentioning

confidence: 61%

Section: Defined Media Supports Dha Productionmentioning

confidence: 99%

Section: Introductionmentioning

confidence: 99%

Section: Introductionmentioning

confidence: 99%

Section: Introductionmentioning

confidence: 99%

See 3 more Smart Citations

Growth condition optimization for docosahexaenoic acid (DHA) production by Moritella marina MP-1

Kautharapu

Rathmacher

Jarboe

2012

Development of a stepwise aeration control strategy for efficient docosahexaenoic acid production by Schizochytrium sp.

Ren

Huang

et al. 2010

161

The effect of aeration on the performance of docosahexaenoic acid (DHA) production by Schizochytrium sp. was investigated in a 1,500-L bioreactor using fed-batch fermentation. Six parameters, including specific growth rate, specific glucose consumption rate, specific lipid accumulation rate, cell yield coefficient, lipid yield coefficient, and DHA yield coefficient, were used to understand the relationship between aeration and the fermentation characteristics. Based on the information obtained from the parameters, a stepwise aeration control strategy was proposed. The aeration rate was controlled at 0.4 volume of air per volume of liquid per minute (vvm) for the first 24 h, then shifted to 0.6 vvm until 96 h, and then switched back to 0.4 vvm until the end of the fermentation. High cell density (71 g/L), high lipid content (35.75 g/L), and high DHA percentage (48.95%) were achieved by using this strategy, and DHA productivity reached 119 mg/L h, which was 11.21% over the best results obtained by constant aeration rate.

Polyunsaturated fatty acids in marine bacteria and strategies to enhance their production

Moi

Leow

Ali

et al. 2018

Polyunsaturated fatty acids (PUFAs) play an important role in human diet. Despite the wide-ranging importance and benefits from heart health to brain functions, humans and mammals cannot synthesize PUFAs de novo. The primary sources of PUFA are fish and plants. Due to the increasing concerns associated with food security as well as issues of environmental contaminants in fish oil, there has been considerable interest in the production of polyunsaturated fatty acids from alternative resources which are more sustainable, safer, and economical. For instance, marine bacteria, particularly the genus of Shewanella, Photobacterium, Colwellia, Moritella, Psychromonas, Vibrio, and Alteromonas, are found to be one among the major microbial producers of polyunsaturated fatty acids. Recent developments in the area with a focus on the production of polyunsaturated fatty acids from marine bacteria as well as the metabolic engineering strategies for the improvement of PUFA production are discussed.