Enhancement of ESD performances of Silicon Capacitors for RFID solutions

Abstract

Radio-Frequency IDentification devices such as smart cards and RFID tags are based on the presence of a resonant tuned LC circuit associated to the RFID Integrated Circuit (IC). The use of discrete capacitor, external to the IC gives greater flexibility and design freedom. In the race of miniaturization, manufacturers of RFID devices always require smaller electronic components. To save space and in the same time improve performances, capacitors are exposed to height and volume constraints. In the same time, the capacitor has to withstand ESD stresses that can occur during the assembly of the device and during operation. Murata has developed a unique thin capacitor technology in silicon. This paper reports the development of a range of low profile capacitors with enhanced ESD performances. The manufacturing process optimization and the design adjustments will be presented here. The process was optimized by taking into account the main electrical parameters: leakage current, breakdown voltage, capacitance density, capacitance accuracy, Equivalent Series Resistance (ESR) and Self-Resonant Frequency (SRF). The dielectric stack was defined in order to integrate up to 330pF in 0402 case. The process architecture, based on accurate planar capacitor with thick dielectric will be discussed. With this architecture there is no constraint to reach low thickness, such as 100μm or even lower. The ESD threshold of each Silicon Capacitor was investigated with design variations associated to Human Body Model measurements. A Single Project Wafer (SPW) was founded with 36 different capacitor designs. Design modulations specifically addressed the orientation and position of the contacts openings. Special care was taken to maximize the width of the contact holes and metal tracks. A mosaic approach, constructed out of a massive network of parallelized elementary cells was also implemented, so that the charges of the ESD pulse do not concentrate at the same place, leading to electrical failure. Examples of defects due to ESD stress will be shown with failure analysis cross-sections and ways to enhance the ESD threshold by design will be illustrated.