Enhanced mechanical properties and corrosion resistance of a Mg–Zn–Ca bulk metallic glass composite by Fe particle addition

Corrosion Resistance and Electrocatalytic Properties of Metallic Glasses

“…Wang et al [40,41] reported that the corrosion resistance of Mg-MGs was slightly reduced when the in situ second phase or reinforcement phase were induced into metallic glass. It is believed, when corrosion is developing, the continuous distribution of glass matrix might be able to prevent corrosion from spreading from one a grain to another a grain directly across the glass matrix.…”

Metals for bone implants. Part 1. Powder metallurgy and implant rendering

“…The co-implanting of Cr and O in Mg has been studied [71]. Bulk metallic glass alloys, such as Ca-Mg-Zn show good degradation and material properties, however the narrow range in which their high temperature formation occurs may make it difficult to use additive manufacturing technologies [72][73][74][75].…”

Enhanced Mechanical Properties of MgZnCa Bulk Metallic Glass Composites with Ti-Particle Dispersion

“…Unfortunately, monolithic MgZnCa bulk metallic glasses are quite brittle, limiting their further applications [2][3][4][5][6]. There have hitherto been a number of studies reporting on effective methods that enhance the strength as well as the plasticity of Mg-based BMGCs through the dispersion of ductile metallic particles such as those of Mo, Fe, Nb, and Ti [7][8][9][10][11][12][13][14][15][16][17]. These ductile metallic particles can absorb the shear strain energy of shear bands, confine the propagation of shear bands, and significantly improve their plasticity.…”