Enhanced Gain Microstrip Patches Operating on Higher Order Modes

Abstract

Novel topologies of rectangular microstrip patches providing broadside radiated one point fed radiators with enhanced gain are compared. The principle of the gain enhancement is based on an extension of a source area. Dominant in-phase current distribution on the patch is maintained by using higher order mode and geometrical modification of the patch topology. That is achieved by introducing suitable perturbation elements in the shape of slots and notches. Two principal patch topologies operating on TM21 and TM03 modes are described. A comparison of simulated and measured properties of realized prototypes at 10 GHz band are presented. The results show that gain 12.3 dBi of single patch can be reached.

Haystack Fires in Australia: Causes and Considerations for Preventative Management

“…Moisture measurements in the microwave region of the electromagnetic spectrum can occur in several ways, including transmission/absorption and reflectance [76]. Some microwave sensors can operate at a distance from an object of interest, while other types can be mechanically joined with it [77]. The potential for a material to absorb energy from certain frequencies increases proportionately with the dielectric constant.…”