Engineering of the thermodynamic properties of bilayer graphene by atomic plane rotations: the role of the out-of-plane phonons

Abstract

We investigated theoretically the specific heat of graphene, bilayer graphene and twisted bilayer graphene taking into account the exact phonon dispersion and density of states for each polarization branch. It is shown that contrary to a conventional belief the dispersion of the out-of-plane acoustic phonons - referred to as ZA phonons - deviates strongly from a parabolic law starting from the frequencies as low as ∼100 cm(-1). This leads to the frequency-dependent ZA phonon density of states and the breakdown of the linear dependence of the specific heat on temperature T. We established that ZA phonons determine the specific heat for T ≤ 200 K while contributions from both in-plane and out-of-plane acoustic phonons are dominant for 200 K ≤ T ≤ 500 K. In the high-temperature limit, T > 1000 K, the optical and acoustic phonons contribute approximately equally to the specific heat. The Debye temperature for graphene and twisted bilayer graphene was calculated to be around ∼1861-1864 K. Our results suggest that the thermodynamic properties of materials such as bilayer graphene can be controlled at the atomic scale by rotation of the sp(2)-carbon planes.

Networked nanoconstrictions: An effective route to tuning the thermal transport properties of graphene

“…Substituting the group velocity of three acoustic phonon branches v l =21.04 km/s, v t =14.9 km/s and v z =2.5 km/s [49] into above equations, we get the Debye temperature is 1035 K, close to the data in literature [45][46][47][48], and also the relationship of correction factor / In figure 2, the correction factor decreases rapidly with the increasing temperature and finally converges to 1 in high temperature region. Thus, in this paper, it is necessary, especially in low temperature region, to correct the simulation results related to temperature by taking the quantum effects into account.…”

“…Since the Debye temperature of graphene is above 1000 K [45][46][47][48], when discussing the temperature properties of thermal resistance in low temperature region, it is necessary to add…”

Phonon thermal conduction in novel 2D materials

“…The rapid progress of nanotechnology achieved in last two decades shows that phonon thermal conduction in nanoscale, such as thin films and nanowires, dramatically differ from that in their bulk counterparts and are strongly suppressed due to the increase of phonon-boundary scatterings, changes in phonon group dispersion and phonon density of states [17][18][19]. These phenomena lead to the possibility of phonon control and heat management in nanoscale, and trigger the recent applications of nanomaterials in thermoelectrics and thermal insulator materials.…”

Enhanced electron-phonon coupling in graphene with periodically distorted lattice

“…Starting from a two-temperature model [41] adapted to the present situation by introducing the electronic [42,43] as well as the phonon density of states [44] of bilayer graphene, we find that the measured enhancement of λ e-ph is sufficient to reproduce both the reduction in peak electronic temperature and the observed decrease in cooling time (green lines in Fig. 4c and d, respectively).…”