Energy Optimization via Process Modification To Maximize Economic Feasibility of the Butane Gas-Splitting Process

Abstract

Gas splitting is an energy-intensive process that is widely used in the chemical industry. Consequently, the cost effectiveness of this process can be maximized through energy optimization. This study focuses on the energy optimization of the commercial mixed butane gas-splitting technique via process modification. Because the previous process is impeded by the instability of the n-butane content in the feedstock, it consumes excessive energy and results in a product that is inferior in purity. Therefore, we initially simulated the previously used process model and then modified this process to achieve the target purity of the product and minimize energy consumption. The energy optimization model was designed in accordance with the standards of the commercial-grade product. After achieving energy optimization, we conducted economic analyses for the two modified processes by considering their capital and operating costs. Each modified process exhibited an approximate reduction of 19.67−21.85% in its energy consumption; however, only one of the two modified processes managed to enhance the product yield (by 1.00%). The net present value of the previous process model was 126.98 M$, whereas those of the modified processes were calculated to be 134.71 and 133.78 M$.

Techno‐economic comparison of amine regeneration process with heat‐stable amine salt reclaiming units

“…It is equal to the annual cost of an investment that has the same value as the present value of the cost incurred by the investment. It can be calculated by dividing the net present value (NPV) by the net present value of the annuity factor (AF) [31][32][33] :…”

Novel mechanical vapor recompression‐assisted evaporation process for improving energy efficiency in pulp and paper industry

“…Total capital cost (TCI) is the cost of the initial construction and installation of the process, and it includes not only the cost for the purchase of the land and building but also the equipment cost. 29 Generally, TCI is calculated by adding up the fixed capital investment (FCI), working capital investment (WCI), and start-up cost (SUC), 30 where FCI is investment cost in land, building, plant, and equipment. WCI is money required to pay for unexpected and planned expenses to build a business and meet the business's short-term duties and obligations.…”

“…Total product cost (TPC) is the cost that occurs during production and service, and it includes electricity, raw materials, personnel expenses, and steam cost. 29 TPC is composed of direct production cost (DPC), fixed charge (FC), and plant overhead cost (OVHD), 33 where DPC is all direct production costs, including specific goods or services. FC is any expense that recurs regularly, including local taxes and insurance.…”

“…TAC signifies the TAC that is necessary for the component factors, and it is the sum of the equivalent annual cost (EAC) and TPC. EAC is the annualized cost that is necessary in the possession, operation, and maintenance 5) 29,35,36 :…”

Methoxy‐methylheptane as a cleaner fuel additive: An energy‐ and cost‐efficient enhancement for separation and purification units

“…23,24 Numerous studies of dynamic control and optimization were presented for evaluation of the economic feasibility of the model via a techno-economic analysis. Choi et al 25 presented the energy optimization methodology of the gas splitting commercial process followed by conducting economic analysis for the modified processes. In their study, the objective function is the sum of the condenser and reboiler duties to replace capital and operating costs.…”