Energy, Exergy and Exergo-Economic Analysis of an OTEC Power Plant Utilizing Kalina Cycle

Abstract

This study aims to analyse an Ocean Thermal Energy Conversion (OTEC) system through the use of a Kalina Cycle (KC), having a water-ammonia mixture as a working fluid. KC represents a technology capable of exploiting the thermal gap of ocean water. This system was then compared with OTEC systems, which exploit ammonia, R134A and butane-pentane mixture as working fluid. The comparison was carried on through energy analysis, exergetic analysis, and exergo-economic analysis using the EES (Engineering Equation Solver) software. For each case study, cost rates and auxiliary equations were evaluated for all components and the mass flow rate and unit exergy cost for each stream. The results showed that the KC with water-ammonia as working fluid achieves the best exergo-economic performance among the examined cycles. The cost of electricity produced through KC using water - ammonia mixture was found to be 26,66 c€/kWh. The thermal efficiency and the exergetic efficiency were calculated and the withdrawal depth of ocean water was considered. The efficiencies resulted to be 3.68% for the thermal efficiency and 95.96% for the exergetic efficiency.

Thermo-Economic Performance of Organic Rankine Cycle-Based Waste Heat Recovery for Power Generation at a Wide Range of Operating Conditions

“…The fossil energy crisis and environmental concerns have emerged as serious issues in recent decades as a result of increased global energy demand [1][2][3][4][5]. As the world's population grows, so does the demand for energy in power generation and industry.…”