Energy-Efficient Envelope Design for Apartment Blocks—Case Study of A Residential Building in Spain

Abstract

Buildings are known to be responsible for about a third of energy consumption in developed countries. This situation, together with the fact that the existing building stock is being renovated at a very slow pace, makes it crucial to focus on the energy retrofitting of buildings as the only way to reduce their contribution to these energy consumptions and the consequences derived from them in terms of pollution and climate change. The same level of insulation and the same type of windows is usually proposed for all dwellings in a building block. This article shows that since the improvements required by each dwelling in the same block are different, the proposed solution must also be different. The methodology is proposed for a practical case consisting of an apartment block in Cádiz, a demonstration building of the European RECO2ST project. To achieve the optimum solution for each case, a multi-objective optimization problem is solved: to minimize the annual heating demand of the building and the standard deviation of the annual demand of the different dwellings. Thanks to the use of the proposed methodology, it is possible to bring the building to a Nearly Zero Energy Building (NZEB) level, while avoiding excessive insulation that causes overheating in summer.

Energy effectiveness of passive cooling design strategies to reduce the impact of long-term heatwaves on occupants’ thermal comfort in Europe: Climate change and mitigation

“…It is important to highlight that the tested passive design strategies were applied to purpose-built structures and then to the prototype building without changing the assigned construction material characteristics from their current state (Reis, Figueiredo & Samagaio, 2021). This type of application was intentionally implemented to test both the feasibility and the applicability of the various passive design strategies without altering of the existing envelope of buildings (de la Flor et al, 2021). A list of the strategies in this building…”

Optimal Renovation Strategies through Life-Cycle Analysis in a Pilot Building Located in a Mild Mediterranean Climate

“…Basically, this method consisted of calculating in each iteration the square root of the total number of cases, in this case 650 simulations. After these calculations were made, the most promising renovation measures were selected and the worst discarded following the methodology described by Sánchez and Salmeron in [24]. In the next iteration, the aleatory combinations of the best measures were calculated.…”