Energy Efficiency for Faster-than-Nyquist Data Transmission Using Processing Algorithms with Decision Feedback

Abstract

One of the ways to increase the volume of transmitted information is to increase the bit rate above the Nyquist barrier. However, an increase in bit rate in the case of FTN (Faster-Than-Nyquist) signals leads to an increase in energy costs for receiving information on channels with limited bandwidth, for example, in Digital Video Broadcasting satellite systems like DVB-S2/S2X. It is possible to minimize energy losses by using the processing algorithm “maximum likelihood sequence estimation”. However, the computational complexity of this algorithm is extremely high, which limits its use, especially in terrestrial mobile satellite terminals. We propose a new bit-by-bit decision feedback algorithm with maximum likelihood ratio estimation of subsequent symbols in the observation interval. This algorithm provides minimal energy costs comparable to the method “maximum likelihood sequence estimation” at speeds 2–3 times higher than the Nyquist barrier. At the same time, the complexity is two orders of magnitude less. It is shown by simulation for a channel with additive noise that energy losses in relation to the potential bit error rate (BER) are less than 4.5 dB. In the presence of Rayleigh fading, the application of the proposed algorithm makes it possible to provide the processing of FTN signals for double bit rates in urban areas with energy costs equal to 12 dB when using an equalizer. We give numerical estimations of the increase in computational complexity for the proposed processing algorithm. It is shown that an increase in the bit rate by 1.5 times leads to an increase in the computational complexity by more than an order of magnitude. The same conclusion can be reformulated in another form: for the proposed algorithm, each decibel of energy gain is achieved by increasing the number of computational operations by 1.5×105. It is experimentally shown that additional energy losses due to non-ideal phase and timing synchronization are no more than 1 dB when the proposed algorithm is applied in a fading channel. The energy costs in fading channels relative to a stationary channel for twice the Nyquist rate are equal to 13.8 dB when using an equalizer.