Elucidation of the Bulging Effect by an Improved Ray‐Tracing Algorithm in Deep Penetration Wire Feed Laser Beam Welding and Its Influence on the Mixing Behavior

Abstract

Herein, an improved ray‐tracing routine using a virtual mesh refinement approach is adopted in a 3D transient multiphysics computational fluid dynamics model for deep penetration wire feed laser beam welding. In a previous study, it was shown that the improved localization of the reflection points of the subrays within the keyhole leads to a more realistic development of the keyhole depth being validated with experimental results. Another effect investigated in detail herein is a drastic change in the flow behavior in the weld pool, which promotes the occurrence of a necking area in the solidification line and subsequent bulging under specific circumstances. This has a detrimental effect on the filler material element transport in the weld pool, leading to an inhomogeneous dilution of the added material. The numerical observations are backed up by experimentally obtained data, allowing to provide a clear physics‐based explanation of the reduced mixing behavior of the filler wire in the melt pool.

Investigations on the Specifics of Laser Power Modulation in Laser Beam Welding of Round Bars

“…Artinov et al [7] and Bachmann et al [8] investigated the formation mechanism of the bulging effect. Slight bulging begins at 6 mm weld depth and it is fully developed at 9 mm weld depth.…”