Elliptical one-side composite bonded repair analysis through a differential evolution algorithm

Abstract

Purpose The purpose of this study is to determine the optimal shape of a one-sided elliptical composite material patch of an adhesively bonded repair of cracked metal plates under biaxial stress. Design/methodology/approach The approach consists on determining the patch topology and adhesive thickness that minimize the stress intensity factor and the bending moment caused by the asymmetry of the repair by applying a differential evolution algorithm with a selection phase using the Deb’s rules. Findings The results demonstrate that an elliptical patch of major axis length equal to the plate width, and minor axis length equal to the crack length, with a thin adhesive thickness, provides the highest stress intensity factor and bending moment reduction, maximizing the fatigue life of the repair. Research limitations/implications The results are limited to linear elastic behavior of the cracked plate and a fully rigid bond between the cracked plate and the patch. The effectiveness of the repair was verified by theoretical calculation of the fatigue life, thus experimental validation is still needed. Practical implications The results of this work can be applied to experimental validations of the effectiveness of the elliptical one-side composite bonded repairs, avoiding and extensive number of experiments, and also, encourage maintainers to explore on this technique that is more economical and easier to apply, in comparison to other repair techniques. By following the patch geometry recommendations proposed herein, it is analytically predicted that the fatigue life may increase by as much as 27 times that of the unpatched plate. Originality/value Currently, there are no detailed studies that assess one-side patch repair procedures, which require consideration of the bending moment and biaxial stress state, and therefore, the optimal patch geometry and adhesive thickness are unknown.

New investigation of delamination using the VCCT method to predict the damage in bonded composite repair plates subjected to tensile load

“…This bonding method reduces stress concentration around the crack's leading edge, resulting in an overall improvement in the structural fatigue life. The principal benefit of the composite patch repair technique lies in its ability to evenly distribute stress across the adhesive area, stress concentrations are the avoided, unlike riveting or bolting where stress concentration zones are inevitable (Makwana and Shaikh, 2020; Chamorro-Cruz et al. , 2023).…”