Electromagnetic design of switched reluctance generator

Switched Reluctance Generator - Modeling, Design, Simulation, Analysis and Control a Comprehensive Review

“…There are different structures of SR Generators such as 12/8 structure, 6/8 structure, 6/4 structure, 6/10 structure, 6/12 structure, 8/6 structure and so on. The electromagnetic design and the design procedure for the 3 phase 12/8 structure SRG is presented in [14].It is shown that the design method and the procedure presented are general for all types of SRG systems irrespective of the structure of the generator and based on the design method and procedure ,a software package for electromagnetic design of the SRG had been developed. A design study of 3 phase SRG to investigate the influence of stator and rotor poles on the machine performance at low speed for use in direct drive wind energy converter is presented in [15] and from the results it is shown that if the machine is not driven into saturation ,the low pole numbered machine perform as good as high pole numbered machine and the machine with the more rotor poles than stator poles had shown good performance.…”

Inovações no projeto de geradores a relutância variável com estudo das influências da saturação magnética e das indutâncias mútuas

“…Não há ímãs permanentes e tampouco escovas [42], além de ser extremamente flexível: suas bobinas podem operar em série ou em paralelo com facilidade [40].…”