Electrochemical treatment of a graphitic forging lubricant effluent: The effect of chloride concentration and current density

Abstract

Borsa, MB.; Jungblut, R.; Pérez-Herranz, V.; Müller, L.; Moura Bernardes, A.; Bergmann, C. (2016). Electrochemical treatment of a graphitic forging lubricant effluent: The effect of chloride concentration and current density. Separation Science and Technology. 51 (1) ABSTRACTThe graphite removal and the chemical oxygen demand (COD) reduction by the electrochemical treatment of an effluent containing a lubricant (oil in water emulsion with graphite) was investigated. The electrochemical cell used a pair of aluminum plates.Since the effluent conductivity was very low, NaCl was used as supporting electrolyte and different current densities as well as different distance between the electrodes were applied. In lower current densities, higher chloride concentrations implied in smaller COD values. The same behavior was observed when electrode distance was decreased. All the tested conditions presented significant graphite removal and COD reductions larger than 94%.