Electrochemical Thin Layers in Nanostructures for Energy Storage

Abstract

Conventional electrical energy storage (EES) electrodes, such as rechargeable batteries, are mostly based on composites of monolithic micrometer sized particles bound together with polymeric and conductive carbon additives and binders. The kinetic limitations of these monolithic chunks of material are inherently linked to their electrical properties, the kinetics of ion insertion through their interface and ion migration in and through the composite phase. Redox chemistry of nanostructured materials in EES systems offer vast gains in power and energy. Furthermore, due to their thin nature, ion and electron transport is dramatically increased, especially when thin heterogeneous conducting layers are employed synergistically. However, since the stability of the electrode material is dictated by the nature of the electrochemical reaction and the accompanying volumetric and interfacial changes from the perspective of overall system lifetime, research with nanostructured materials has shown often indefinite conclusions: in some cases, an increase in unwanted side-reactions due to the high surface area (bad). In other cases, results have shown significantly better handling of mechanical stress that results from lithiation/delithiation (good). Despite these mixed results, scientifically informed design of thin electrode materials, with carefully chosen architectures, is considered a promising route to address many limitations witnessed in EES systems by reducing and protecting electrodes from parasitic reactions, accommodating mechanical stress due to volumetric changes from electrochemical reactions, and optimizing charge carrier mobilities from both the "ionic" and "electronic" points of view. Furthermore, precise nanoscale control over the electrode structure can enable accurate measurement through advanced spectroscopy and microscopy techniques. This Account summarizes recent findings related to thin electrode materials synthesized by atomic layer deposition (ALD) and electrochemical deposition (ECD), including nanowires, nanotubes, and thin films. Throughout the Account, we will show how these techniques enabled us to synthesize electrodes of interest with precise control over the structure and composition of the material. We will illustrate and discuss how the electrochemical response of thin electrodes made by these techniques can facilitate new mechanisms for ion storage, mediate the interfacial electrochemical response of the electrode, and address issues related to electrode degradation over time. The effects of nanosizing materials and their electrochemical response will be mechanistically reviewed through two categories of ion storage: (1) pseudocapacitance and (2) ion insertion. Additionally, we will show how electrochemical processes that are more complicated because of accompanying volumetric changes and electrode degradation pathways can be mediated and controlled by application of thin functional materials on the electrochemically active interface; examples include conversion electrodes, reactive lithiu...

Metal Fluorides as Lithium-Ion Battery Materials: An Atomic Layer Deposition Perspective

“…ALD Al 2 O 3 is generally used for this application and it has been found that a few ALD cycles can improve the cycling capability and capacity retention of the electrodes [80,81]. These results will not be discussed further here but the reader is advised that a lot of literature on this subject is available [80][81][82][83]. Some examples of ALD-made metal fluorides as artificial SEI layers will be shortly mentioned in Section 5.…”

Hierarchically Porous Heteroatoms‐doped Vesica‐like Carbons as Highly Efficient Bifunctional Electrocatalysts for Zn‐air Batteries

“…[4][5][6] To overcome the unfavorable cost and accelerate the practical applications, an appropriate specific amount of efficient non-precious transition metal compound materials including oxides, hydroxides, sulfides, phosphides, and phosphates, have been well-developed for electrochemical oxygen reduction and evolution reactions, exhibiting considerable electrocatalytic performance. [7][8][9] However, the insufficient stability and easy-aggregation property under harsh operating conditions and long-term service greatly weaken their superiority for widespread applications. [10][11][12] Accordingly, the catalysts with high electrocatalytic efficiency and robust durability beyond metallic electrocatalysts have attracted unprecedented attention.…”

“…Nevertheless, noble metal materials, for instance, Pt and its alloys for ORR and IrO 2 /RuO 2 for OER, remain the efficient electrocatalysts to decrease the large overpotentials resulted from polarization effect and unfavorably sluggish kinetics caused by multi‐electron process . To overcome the unfavorable cost and accelerate the practical applications, an appropriate specific amount of efficient non‐precious transition metal compound materials including oxides, hydroxides, sulfides, phosphides, and phosphates, have been well‐developed for electrochemical oxygen reduction and evolution reactions, exhibiting considerable electrocatalytic performance . However, the insufficient stability and easy‐aggregation property under harsh operating conditions and long‐term service greatly weaken their superiority for widespread applications .…”

Boosting the Supercapacitance of Nitrogen‐Doped Carbon by Tuning Surface Functionalities

“…Electrochemical devices such as batteries, fuel cells, and supercapacitors play a central role in this field 2, 3, 4. Each renewable energy source (e.g., wind, solar, geothermal) sets its own requirements for energy density, power density, life‐time, cost, and size.…”

“…[1] Electrochemical devices such as batteries, fuel cells, and supercapacitors play ac entralr olei nt his field. [2][3][4] Each renewable energy source (e.g.,w ind, solar,g eothermal) sets its own requirements for energy density,p ower density,l ife-time, cost, and size. Supercapacitors (also called electrochemical capacitors or ultracapacitors) are important power sourcesfor applications that require fast chargeand discharge.…”