Electrochemical Investigation of Corrosion of X80 Steel under Elastic and Plastic Tensile Stress in CO2 Environment

Abstract

An investigation into the electrochemical corrosion behavior of X80 pipeline steel under different elastic and plastic tensile stress in a CO2-saturated NaCl solution has been carried out by using open-circuit potential, potentiodynamic polarization, electrochemical impedance spectroscopy, and surface analysis techniques. The results show that the corrosion rate of X80 steel first increases and then slightly decreases with the increase of elastic tensile stress, whereas the corrosion rate sharply increases with the increase of plastic tensile stress. Both elastic and plastic tensile stress can enhance steel corrosion by improving the electrochemical activity of both anodic and cathodic reactions. Moreover, compared with elastic tensile stress, plastic tensile stress has a more significant effect. Furthermore, electrochemical reactions for CO2 corrosion and mechanoelectrochemical effect are used to reasonably explain the corrosion behavior of stressed X80 steel in CO2 environment.

Porous Electrode Model with Particle Stress Effects for Li(Ni1/3Co1/3Mn1/3)O2Electrode

“…Therefore, the E eq is expected to be reduced under the effect of tensile stress. 35 Stress interacts with diffusion in a two-way coupling in which diffusion induces stress (DIS), which in turn affects diffusion (stressenhanced diffusion). 17,21,[31][32][33]36 In this study, the fitted effective intercalation diffusion coefficient D s,eff described by the Fick's second law in Equation 6 includes the impact of gradients of stress as a driving force for diffusion inside the particle:…”

Magnetic variation in construction steels under tensile stress. Empirical research with Helmholtz coils

“…%C eq = %C + %Mn 6 + %Cr + %Mo + %V 5 + %Ni + %Cu 15 [1] The relation in which flow density can be calculated in any point of space where the electric current circulates is given by Biot-Savart law (Equation [2]):…”

“…Steel ribbed bars provide reinforced concrete structures with higher flexural strength. The study of these materials is crucial to determine the behaviour of structures during the building process (2). Magnetism of materials is caused by magnetic moments associated to the motion of individual electrons, so that in every individual atom, orbital moments of some electronics pairs are fully cancelled, as are in spin moments.…”

Failure Mechanisms in Alloys

“…(i) Casting and Metal Forming [6,7,11,13,15,19,[24][25][26] (ii) Machining [12,16,20] (iii) Chemical/Petrochemical [3,17,21,23] (iv) Heat Treatment [22] (v) General Plant Machinery [1,9,18,24] b. Fatigue and Cyclic Loading [8,9,18]; c. Corrosion and Environmentally Assisted Cracking [3,5,11,21]; d. Wear and Surface Degradation [1,24,27].…”