Electrochemical Biosensor for Markers of Neurological Esterase Inhibition

Abstract

A novel, integrated experimental and modeling framework was applied to an inhibition-based bi-enzyme (IBE) electrochemical biosensor to detect acetylcholinesterase (AChE) inhibitors that may trigger neurological diseases. The biosensor was fabricated by co-immobilizing AChE and tyrosinase (Tyr) on the gold working electrode of a screen-printed electrode (SPE) array. The reaction chemistry included a redox-recycle amplification mechanism to improve the biosensor’s current output and sensitivity. A mechanistic mathematical model of the biosensor was used to simulate key diffusion and reaction steps, including diffusion of AChE’s reactant (phenylacetate) and inhibitor, the reaction kinetics of the two enzymes, and electrochemical reaction kinetics at the SPE’s working electrode. The model was validated by showing that it could reproduce a steady-state biosensor current as a function of the inhibitor (PMSF) concentration and unsteady-state dynamics of the biosensor current following the addition of a reactant (phenylacetate) and inhibitor phenylmethylsulfonylfluoride). The model’s utility for characterizing and optimizing biosensor performance was then demonstrated. It was used to calculate the sensitivity of the biosensor’s current output and the redox-recycle amplification factor as a function of experimental variables. It was used to calculate dimensionless Damkohler numbers and current-control coefficients that indicated the degree to which individual diffusion and reaction steps limited the biosensor’s output current. Finally, the model’s utility in designing IBE biosensors and operating conditions that achieve specific performance criteria was discussed.

Recent Advances, Opportunities, and Challenges in Developing Nucleic Acid Integrated Wearable Biosensors for Expanding the Capabilities of Wearable Technologies in Health Monitoring

“…As a result of target binding, the chemical reaction is transduced into an electrical signal that can be measured corresponding to target concentrations [ 109 ]. Along with these attractive features come some challenges, including sensitivity to sample matrix effects, narrow optimal temperature range for operation, and restrictive shelf life [ 110 , 111 ]. Continuing with the trend of aptamer-based wearable biosensors for sweat cortisol detection, a watch, named CATCH, consists of an aptamer-functionalized ZnO coated sensor surface with a nano-porous polyamide substrate to detect cortisol [ 81 ].…”

Development of an Aptamer-Based QCM-D Biosensor for the Detection of Thrombin Using Supported Lipid Bilayers as Surface Functionalization

“…Depending on the type of transducer, different types of biosensors can be distinguished. The most common types are optical, electrochemical, and piezoelectric sensors [ 4 , 5 , 6 , 7 ]. The biological recognition element should be sensitive and selective for the target analyte.…”

Biosensor Based on Covalent Organic Framework Immobilized Acetylcholinesterase for Ratiometric Detection of Carbaryl

“…Thus, the catalytic hydrolysis of ATCh is weakened, leading to a decrease in the production of thiocholine (TCh). The response current of TCh is inversely proportional to the concentration of carbamate pesticides such as carbaryl; therefore, this causes the simple, efficient and sensitive detection of carbaryl [ 27 , 28 , 29 , 30 , 31 ].…”