Electrical conductivity and hardness of ternary Ge-In-Sb allyos and calculation of the isothermal section at 300 °C

Abstract

This publication presents results of experimental investigation and thermodynamic calculation of the ternary Ge-In-Sb system. Isothermal section of the Ge-In-Sb system at 300 °C has been extrapolated using optimized thermodynamic parameters for the constitutive binary systems. Microstructure analysis was carried out by light microscope, scanning electron microscopy with energy dispersive spectrometry and X-ray powder diffraction methods and obtained results were compared with predicted phase equilibria. Hardness of selected alloys annealed at 300 °C was measured using Vickers microhardness test and Brinell hardness test. Electrical conductivity of a number of alloys annealed at 300 °C was experimentally determined. Good overall agreement between experimental and calculated values was obtained.

Experimental Evaluation of 300 ºC section of Cu-In-Ni Phase Diagram, Hardness and Electrical Conductivity of Selected Alloy

“…Additionally, chemical and phase compositions of the studied alloys determined by SEM-EDS and XRD analyses are presented as well. The applied research procedure is similar to that given in [16][17][18] and it is aimed at providing better insight into properties of alloys which should contribute to further expansion of their application possibilities.…”