Electric explosion alloying of the surface of hard alloy vk10ks with titanium and silicon carbide

The porosity study of sintered products from electro-erosive materials of alloy Cr13, obtained in butyl alcohol

“…As a result, particles were obtained with an average size of 39 μm. The final porosity of sintered products is influenced by the modes of pressing and sintering [8][9][10][11][12][13][14].…”

X-ray spectral analysis of sintered articles made of electroerosive lead bronze obtained in lighting kerosene

“…As a result of the local impact of short-term electrical discharges between the electrodes, the waste material was destroyed with the formation of dispersed powder particles [3][4][5][6][7][8][9][10][11][12][13][14][15][16][17][18][19] (Fig.1).…”

X-ray diffraction analysis of products sintered from isostatically pressed leaded bronze powders

“…The operating principle of the isostatic press is to create a high hydrostatic pressure applied to the powder (metal or ceramic) at an ambient temperature. Water or oil is used as a pressure transmitter [2][3]. First, we put the powder in a rubber mold and then we manually compacted it up to a density of 3.1847 g/cm 3 .…”

“…Water or oil is used as a pressure transmitter [2][3]. First, we put the powder in a rubber mold and then we manually compacted it up to a density of 3.1847 g/cm 3 . Next, we put the sample in the press's process chamber at a temperature of 18 °C and injected the pressure to the prescribed rate.…”