Efficient Heat Exchange Configuration for Sub-Cooling Cycle of Hydrogen Liquefaction Process

Abstract

The hydrogen liquefaction process is highly energy-intensive owing to its cryogenic characteristics, and a large proportion of the total energy is consumed in the subcooling cycle. This study aimed to develop an efficient configuration for the subcooling cycle in the hydrogen liquefaction process. The He-Ne Brayton cycle is one of the most energy-efficient cycles of the various proposed hydrogen liquefaction processes, and it was selected as the base case configuration. To improve its efficiency and economic potential, two different process configurations were proposed: (configuration 1) a dual-pressure cycle that simplified the process configuration, and (configuration 2) a split triple-pressure cycle that decreased the flow rate of the medium- and high-pressure compressors. The ortho–para conversion heat of hydrogen is considered by using heat capacity data of equilibrium hydrogen. Genetic algorithm-based optimization was also conducted to minimize the energy consumption of each configuration, and the optimization results showed that the performance of configuration 1 was worse than that of the base case configuration. In this respect, although less equipment was used, the compression load on each compressor was very intensive, which increased the energy requirements and costs. Configuration 2 provided the best results with a specific energy consumption of 5.69 kWh/kg (3.2% lower than the base case configuration). The total expense of configuration 2 shows the lowest value which is USD 720 million. The process performance improvements were analyzed based on the association between the refrigerant composition and the heat exchange efficiency. The analysis demonstrated that energy efficiency and costs were both improved by dividing the pressure levels and splitting the refrigerant flow rate in configuration 2.

Advanced Design of Integrated Heat Recovery and Supply System Using Heated Water Storage for Textile Dyeing Process

“…Q Steam is the heat demand of the dyeing process. Annual maintenance cost was assumed to be 3% of the total CAPEX [20]. Table 10 presents the cost parameters used to calculate the total cost.…”

“…Interest rate [21] 7% Operating hours [7] 8000 h/yr Plant operating life [13] 5 years Steam cost [22] USD 1.16 × 10 −5 /kJ Annual maintenance cost [20] 3% of the total capital cost Table 10. Cost parameters for the economic analysis.…”