Effects of various loading on the performance of MEMS cantilever beam for in-field tuning of sensors and actuators for high temperature and harsh environment applications

Dounkal, Manoj Kumar; Bhan, R. K.; Kumar, Navin

doi:10.1007/s00542-019-04551-8

Cited by 8 publications

(2 citation statements)

References 19 publications

Supporting

Mentioning

Contrasting

Order By: Relevance

“…The latter class, however, suffered from high cross-axis sensitivity. Among the additional advantages of MEMS based sensors, recently the possibility of field tuning using axial compression and tensile loading was discussed by Dounkal et al in [7]. In our present study, an innovative differential capacitance design approach is proposed for acceleration measurment using a comb-based changing overlapp area method that eliminates many of the above limitations and further has many associated advantages, discussed in subsequent sections.…”

Section: Introductionmentioning

confidence: 88%

A new improved vertical comb type differential capacitive sensing micro accelerometer using silicon-on-insulator wafer technology

Dounkal¹,

Bhan²,

Kumar³

2020

J. Micromech. Microeng.

View full text Add to dashboard Cite

A new and improved approach using vertical combs for the differential capacitive sensing of acceleration using silicon-on-insulator (SOI) wafer technology is presented. The design, which supports a ± 30 g operational range demonstrates the enhanced linear range that is achievable using an SOI approach, which overcomes the limitations of the dissolved wafer process (DWP) technology based on the diffusion layer depth in silicon, used for the fabrication of MEMS accelerometers. Two technological approaches are compared, one having the same thicknesses of fixed and movable interdigitated fingers (DWP) and the other having different thicknesses, using an SOI wafer. A remarkable sensitivity improvement, by a factor of up to two, is achieved for the capacitance change per unit g (deltaC g−1) using the new differential SOI design presented here. The bandwidth of the device is also improved significantly in the SOI design, compared to the DWP design. Furthermore, the effect of temperature (−40 °C to 125 °C) has an almost negligible influence on (deltaC) due to the built-in differential concept of comb-type fingers compared to DWP technology. Cross-axis sensitivity is also very low due to the stable, robust design of the accelerometer offering less stiction sideways and better pull-in stability. Simple analytical relations for dynamically changing overlap capacitance are derived and presented. These analytical results are compared with simulations using Coventorware software and are in agreement to within 1.8% in a linear range of operation up to a tip deflection of 8.5 µm. The effects of fabrication tolerances, including all the process steps, on the sensitivity (deltaC g−1) and bandwidth (BW), are also studied and the results presented. An overall figure of merit (FOM) is included which is better in this study compared to the available literature. Furthermore, only two wafers are needed to fabricate the proposed differential capacitive sensors, compared to conventional push–pull three plate systems using three wafers. A separate deep reactive ion etching (DRIE) step on two different wafers offers better debris removal as compared to the interdigitated fingers cut by a single DRIE step.

show abstract