Effects of Stem Cutting in Rice Harvesting by Combine Harvester Front Header Vibration

Abstract

In order to reveal the reason of stem cutting in rice harvesting by combine harvester front header, stem cutting principle of the front header was developed. Based on the structural models and the parameters of each part of header, the first eight-order constrained modal simulation analysis was carried out to obtain the vibration response frequency. The front header was produced and used to be tested for restraint experimental modal in the rice field. The rice stem cutting state of the header cutter was analyzed by carrying out the vibration test of the no-load rotation state and rice harvesting state in the field. According to the cutting diagram of the stalk in the header, the angle of the cutting surface and length distribution of the short stalk were analyzed with compound state of forward and vertical vibration. The results showed the mean and variance amplitude of front header were similar to length distribution of the short stalk. The mean length 23.60 mm of the repeatedly cut stems was inextricably linked to the up and down vibration amplitude 25.36 mm of the header. The stem cutting surface angles 38°, 44°, and 62° were for different forward speed and cutting areas on the cutting diagram. The above studies reveal the intrinsic nature between header vibration and length distribution of the cutting stem.

Comparative Study of Vibrations in Apparatus Combinations Tangential Threshing

“…Therefore, the user is advised to use a lower engine speed (1800 rpm speed) when using the combine. Based on the findings of this study, drivers can drive the John Deere combine at 1800 rpm engine speed using gears 1 and 2 and 2500 rpm engine speed using stage 1 for 8 hours a day without any problems [14].…”

Design and Prototype Test of key components of Segmented Ligusticum wallichii Harvester

“…The vibration mechanism must have a good effect on soil breaking and separation, and avoid the phenomenon of soil clogging during work, so the vibration mechanism must also have the function of throwing the mixture backward. Referring to the design of rice vibration mechanism [6] , the structure of the mechanism is preliminarily determined to be mainly composed of: Axis, crank, driving connecting rod, driven connecting rod, fixed connecting rod, bearing seat, side plate, vibrating plate and steel bar, as shown in Figure 6 show. The closed vector method is used to analyze the kinematics of the vibrating mechanism.…”

Lightweight Threshing Rack under Multisource Excitation Based on Modal Optimization Method

“…Before rack modal analysis, the rack needs to be meshed to form a unit with a finite number of nodes. Grids of different sizes and shapes have an important impact on the analysis results [15]. e meshing platform in the Finite Element analysis software can automatically perform meshing according to the structure and characteristics of the object.…”