Effects of electric field during deposition on spray deposited indium‐doped zinc oxide films

Abstract

Indium‐doped zinc oxide (IZO) thin films were deposited on a glass substrate using spray technique with a direct current (DC) voltage applied to the nozzle to create an electric field during deposition. It was found that the presence of the electric field has a strong effect on doping efficiency, structural, electrical, and optical properties. Incorporation of indium in ZnO was confirmed by the Rutherford back scattering and X‐ray diffraction peak analysis. Scanning electron microscope micrograph showed that the surface morphology changed from rice‐like structure to flower‐like compact structure. The electrical resistivity of IZO film prepared under the electric field was 2 × 10−3 Ω cm, transmission in the visible region was more than about 80%, and figure of merit (ΦTC) was 3.39 × 10−3 Ω−1. The films deposited under the electric field showed a band gap narrowing, which is explained using the many body effects in the perturbation theory. Spray deposited IZO film under the electric field was shown to be useful for making self‐cleaning top glass in solar cell module fabrication. Copyright © 2015 John Wiley & Sons, Ltd.

Silver Nanowires Binding with Sputtered ZnO to Fabricate Highly Conductive and Thermally Stable Transparent Electrode for Solar Cell Applications

“…The high values of bulk concentration and mobility of AgNW­(ZnO) may be due to increased metal concentration in the film . The values of mobility and bulk concentration of our AgNW­(ZnO) TCE are almost equal to those of other TCEs, which are being developed to replace ITO. , To define superiority of TCE, a parameter known as figure of merit (Φ) has been introduced . Figure of merit is defined as Φ = T 10 / R s , where T is transmittance at 550 nm and R s is sheet resistance of the TCE.…”

Design of Core–Shell‐Structured ZnO/ZnS Hybridized with Graphite‐Like C3N4 for Highly Efficient Photoelectrochemical Water Splitting

“…The cheap, efficient, and stable semiconductor photoelectrodes to split water and generate hydrogen at large scales are necessary in photoelectrochemical (PEC) cell for clean and practical hydrogen production. Zinc oxide (ZnO), as a well‐known n ‐type oxide semiconductor with a wide and direct bandgap (≈3.3 eV) at room temperature, has been intensively investigated for optoelectronic devices, solar cells, sensors, electrochromic widows, and solid‐state display devices because of its unique electrochemical properties, high electron mobility, low cost, and nontoxicity. However, the wide bandgap and rapid recombination of photogenerated carriers, leading to weak light absorption and low photocatalytic quantum yield, will hinder the photocatalytic applications of ZnO …”

Multilayer and Thin Transparent Conducting Oxide Fabrication Using RF Magnetron Sputtering on Flexible Substrates

“…Transparent conductive oxides (TCOs) are a very significant component in wearable and mobile optoelectronic devices such as photovoltaic devices, displays, and light-emitting diodes. [1][2][3][4][5][6] Sn-doped indium oxide (ITO) is commonly used, but indium being a highly expensive material, a rapid rise in the manufacturing costs for these devices is observed. 3,4 Development of cost-effective TCOs using oxides such as TiO 2 , SnO 2 , ZnO, etc.…”