Effects of Cu-Ni-Ti Interlayer on Microstructure and Wear Resistance around Gas Tungsten Arc Cladding Copper Matrix Composite Coatings on Steel

Abstract

Due to the huge difference in thermophysical properties, it is difficult to obtain a defect-free bonding interface between copper and steel. A Cu-Ni-Ti interlayer was added between a TiC-reinforced copper matrix composite coating and Q235 steel in this study to improve its interfacial bond. The influence of the interlayer on its microstructure and properties was studied by characterizing microstructure, phase composition, and wear resistance of the composite coatings. Both coatings were found to consist of α-Cu matrix, in situ-generated TiC, and Fe-rich phases. With the addition of the Cu-Ni-Ti interlayer, the high-hardness unmixed zone at the interface was successfully eliminated due to the sufficient mixing of the molten pool. Even more importantly, liquid metal embrittlement cracks were also restrained, resulting from the Fe-rich solid solution band that reduced the contact probability around liquid copper atoms with the steel grain boundaries formed. In addition, the results showed that the microhardness of composite coatings was improved and the wear loss reduced by 4.2% after adding that interlayer, which was related to the combined action of solid solution strengthening, second-phase strengthening and grain-refinement strengthening mechanisms.