Effect of the structure and properties of hearth carbon blocks on premature shutdown of electrolytic baths

Abstract

Premature shutdown of electrolytic baths after a short service life leads to an increase in the cost of aluminum and serious economic losses. The most important element governing the service life of an electrolytic bath is the hearth that is lined with refractory hearth blocks. Presence of one concealed crack, that is exposed in the start-up period, may lead to failure of the whole electrolyzer in the first year of service. There are many producers and users of hearth blocks, and there are many specifications for cathode hearth blocks, although the requirements for them are selected in a very empirical way without considering actual service conditions. Scientifically based requirements for the material of hearth blocks is still in the formation stage. In 2004 in four aluminum enterprises under major repair hearth blocks were used from nine different producers that made it possible during evaluation of the statistics for shutting down young baths to determine the effect of the structure and properties of hearth blocks on the service life of electrolyzers and to formulate requirements for hearth block material. The contribution of permeable porous cathode carbon blocks on premature shutdown of electrolyzers by a mechanism of hearth uplift due to formation of a lens of electrolyte and refractory reaction products is demonstrated. Critical gas permeability and the maximum size of permeable pores in refractory hearth units are determined. Applicability of the first and second Hasselman criteria for the heat resistance of hearth block materials is demonstrated for predicting shutdown of young baths by a crack development mechanism in blocks due to thermomechanical stresses.

Grain size composition and porous structure of carbon hearth block materials for aluminum electrolyzers

“…The material considered is a continuation of the cycle of articles for evaluating the characteristics of carbon hearth blocks for aluminum electrolyzers [1,2] it has been shown that the size of permeable pores is a critical property of the structure of blocks from the point of view their service life. This conclusion was drawn on the basis of simulating movement of electrolyte through permeable pores of hearth blocks and was confirmed by experimental observations.…”