Effect of sulfidization on the stability of adsorption of isoamyl xanthate on malachite

Abstract

The activity and stability of adsorbed isoamyl xanthate (IX) on a malachite surface before and after sulfidization were studied by calculating the malachite dissolved component and adsorption energy and performing experiments the zeta potential measurements, adsorption and desorption, and flotation experiments. In the malachite slurry solution, the main components of copper are Cu 2+ , CuCO3, HCuO2-, CuO2-, and Cu(CO3)2 2-, and the concentration distribution of these components was related to the slurry pH value. Between pH 5 to 9, the main copper component in the slurry was CuCO3. The malachite surface was negatively charged; however, the sulfur ions or hydrosulfide ions could still adsorb on the surface at a pH of more than 8.2, which indicated that the sulfidization of malachite corresponds to the chemical adsorption, and the surface electrical properties of the malachite were not obvious to the sulfidization. The adsorption activity of malachite on IX was stronger than that of the sulfide malachite; however, the desorption ratio of IX concerning the malachite was higher than that of the sulfide malachite. The adsorption energy of IX on the malachite and sulfide malachite surface was-449.6 kJ/mol and-1134.7 kJ/mol, respectively, and the IX adsorbed on the sulfide malachite surface was more stable. The flotation experiments indicated that the sulfidization of malachite reduced the consumption of IX; however, the recovery of malachite was improved.