Effect of Reinforcememt Particles Preheating on Mechanical and Microstructural Properties of Amc

Abstract

<p class="AMSmaintext">An investigation into the effect of preheating the powder particles versus not preheating before mixing it with an aluminium slurry was carried out. This was seen as way of overcoming the challenge of wettability which often occurs when powder particles are added to a melted metal for the purpose of developing a metal matrix composite. In this study, non – preheated, 2 w.% preheated and 4 w.% preheated palm kernel shell ash powder was used to develop an aluminium matrix composite (AMC) via stir casting method. Mechanical properties revealed that AMC with 4 w.% pks ash inclusion has the highest Vickers Hardness value. Meanwhile, optical micrographs and scanning electron micrograph show that the pks ash both non – preheated and preheated are homogenously distributed into the matrix. This is further confirmed by the energy dispersive spectroscopy (EDS) mapping of the various samples. Although pks ash particles are only visible on the optical microscope micrographs, the elemental analysis of the various samples through EDS show a strong presence of carbon at various degree proving the presence of pks ash in the composite. Overall, preheating does not significantly affect the surface morphology of the AMCs based on the derived optical and scanning electron micrographs and AMC with higher content of pks ash particles seems to have better mechanical properties</p>