Effect of processing method on the mechanical and thermal of Silvergrass/HDPE composites

Liu, Bing; Jin, Yueqiang; Wang, Shuying

doi:10.1063/1.4982367

Cited by 1 publication

(4 citation statements)

References 3 publications

Supporting

Mentioning

Contrasting

Order By: Relevance

“…Adding MAPE to composite materials were also improved the values. Similar results were also reported by others (Liu & Wang, 2017;Tisserat et al, 2017;Huang et al, 2018;Cavus & Mengeloglu, 2020). Flexural modulus values of composites were in the range of 179.6-576.3 MPa (Figure 10b).…”

Section: Mechanical Properties Of Sbp/ldpe Compositessupporting

confidence: 92%

“…In our previous study, similar trend was also observed for injection molded samples (Karakus et al, 2016). It was noted that the samples produced with injection molded have better tensile strength values than the compression molded samples due to providing the homogeneous distribution of fillers in matrix (Bledzki & Faruk, 2004;Liu et al, 2017). The tensile strength values were improved with MAPE coupling agent due to the improved compatibility of the matrix and filler.…”

Section: Mechanical Properties Of Sbp/ldpe Compositessupporting

confidence: 77%

“…With the addition of MAPE, tensile strength values were increased linearly. MAPE is well known as an effective interfacial adhesion agent (Yang et al, 2007;Tasdemir et al, 2009;Liu et al, 2017;Cavus & Mengeloglu, 2019). Tensile modulus values in the range of 94.8-222.7 MPa in composite samples.…”

Section: Mechanical Properties Of Sbp/ldpe Compositesmentioning

confidence: 99%

“…Previous studies, some properties of composite materials produced with the compression and injection molding methods were investigated using the different thermoplastic and lignocellulosic materials such as wood fiber/PP (Bledzki & Faruk, 2004), carbon nanotube/PS (Arjmand et al, 2012), silver glass/HDPE (Liu et al, 2017) and wood flour/Polyolefin waste (Basalp et al, 2020).…”

Section: Introductionmentioning

confidence: 99%

See 3 more Smart Citations

Production of Sugar Beet Pulp/LDPE Composites Using Compression Molding Method and Investigation of Some Properties

BİRBİLEN

Karakuş

Mengeloğlu

2021

Kastamonu Üniversitesi Orman Fakültesi Dergisi

View full text Add to dashboard Cite

Aim of study: In this study, the effect of lignocellulosic filler and coupling agent amount on the physical and mechanical properties of produced sugar beet pulp/LDPE composites were researched.Material and methods: Wood-plastic composites were produced using compression molding method. The effect of lignocellulosic filler and coupling agent (maleic anhydride grafted polyethylene) amount on the physical (density and water uptake analyses) and mechanical (tensile strength, tensile modulus, elongation at break, flexural strength, flexural modulus, and impact strength) properties of composites were investigated.Main results: According to the obtained results, the rise in the amount of SBP were increased the density, tensile modulus, flexural strength, and flexural modulus while decreasing tensile strength, elongation at break, and impact strength of the resulting composites. Generally, the increase of coupling agent (MAPE) amount improved the composites properties except for impact strength and elongation at break.Highlights: Sugar beet pulp (SBP) can be successfully used as an alternative lignocellulosic filler in the wood plastic composite production.

show abstract

Section: Mechanical Properties Of Sbp/ldpe Compositessupporting

confidence: 92%