Effect of polyvinylidene fluoride on the fracture microstructure characteristics and piezoelectric and mechanical properties of 0-3 barium zirconate titanate ceramic-cement composites

Wittinanon, Thanyapon; Rianyoi, Rattiyakorn; Chaipanich, Arnon

doi:10.1016/j.jeurceramsoc.2020.02.041

Cited by 13 publications

(11 citation statements)

References 28 publications

Supporting

Mentioning

Contrasting

Unclassified

Order By: Relevance

“…Rianyoi et al [ 38 , 67 , 68 , 69 ] prepared the barium titanate-cement composites and characterized the influence of the particle size and polyvinylidene fluoride (PVDF). Chaipanich et al [ 39 , 50 , 70 , 71 , 72 , 73 ] fabricated barium zirconate titanate-cement composites and studied their microstructure and piezoelectric performance. Hunpratub et al [ 74 ] believe that BCTZO (Ba 0.85 Ca 0.15 Ti 0.9 Zr 0.1 O 3 ) particle is an alternative material as function phase and revealed the effect of particle size on dielectric and piezoelectric properties.…”

Section: Recent Study On Cement-based Piezoelectric Compositesmentioning

confidence: 99%

“…Potong et al [ 72 ] considered the effect of the complex hydration condition and the various hydration products in the cementitious material and applied linear voltage-differential transformer dilatometer to test the thermal expansion, indicating that the thermal expansion the coefficient of the composites with 30~70% BZT ceramic powder is similar to that of concrete. Wittinanon et al [ 39 ] evaluated the effect of PVDF on the composite’s mechanical properties using the indentation technique. Moreover, acoustic impedance, porosity, and leakage current of the composite with different PVDF content were also characterized [ 38 ].…”

Section: Theory Experiments and Simulationmentioning

confidence: 99%

“…Lead-Bearing CPCs Lead-Free CPCs Piezoelectric strain factor d 33 (10 −12 C/N) 215~513 [79] 190~235 [38,39] 0.5~87 [45,80] 5 *~143 * [37,52,64] 4~61.5 [74,75] Piezoelectric voltage factor g 33 (10 −3 Vm/N) 15.9~25 [79] 12.43~18.28 [38,39] 15~60 [34,81,82] 20 *~30 * [83] 7~33.59 [38,75] Dielectric constant ε r (at 1 kHz) 1050~3643 [37,77] 1452~1726 [38,39] 43.5~536 [34,47,48] 1017.6~1834.2 [78] 280 *~890 * [60,64] 120~350 [38,39] Thickness…”

Section: Lead-free Piezoelectric Ceramicmentioning

confidence: 99%

“…Admixture usually can positively impact the matrix compactness, thereby affecting the overall mechanical properties and acoustic impedance. Wittinanon et al [38,39] revealed that PVDF could simultaneously control the piezoelectric properties, mechanical properties, and microstructure. Performance testing until stable…”

Section: Admixture For Cpcsmentioning

confidence: 99%

See 3 more Smart Citations

Cement-Based Piezoelectric Ceramic Composites for Sensing Elements: A Comprehensive State-of-the-Art Review

Ding

Liu

Shiotani

et al. 2021

Sensors

View full text Add to dashboard Cite

Compatibility, a critical issue between sensing material and host structure, significantly influences the detecting performance (e.g., sensitive, signal-to-noise ratio) of the embedded sensor. To address this issue in concrete-based infrastructural health monitoring, cement-based piezoelectric composites (piezoelectric ceramic particles as a function phase and cementitious materials as a matrix) have attracted continuous attention in the past two decades, dramatically exhibiting superior durability, sensitivity, and compatibility. This review paper performs a synthetical overview of recent advances in theoretical analysis, characterization and simulation, materials selection, the fabrication process, and application of the cement-based piezoelectric composites. The critical issues of each part are also presented. The influencing factors of the materials and fabrication process on the final performance of composites are further discussed. Meanwhile, the application of the composite as a sensing element for various monitoring techniques is summarized. Further study on the experiment and simulation, materials, fabrication technique, and application are also pointed out purposefully.

show abstract

Section: Recent Study On Cement-based Piezoelectric Compositesmentioning

confidence: 99%

Section: Theory Experiments and Simulationmentioning

confidence: 99%

Section: Lead-free Piezoelectric Ceramicmentioning

confidence: 99%

Section: Admixture For Cpcsmentioning

confidence: 99%

See 2 more Smart Citations

Cement-Based Piezoelectric Ceramic Composites for Sensing Elements: A Comprehensive State-of-the-Art Review

Ding

Liu

Shiotani

et al. 2021

Sensors

View full text Add to dashboard Cite

show abstract

“…Therefore, carbon nanotubes or carbon black are added as a third conductive phase to establish continuous electrical ux paths between the ceramic particles in the composites, and hence enable easier poling in such composites [12][13][14][15]. However, it is found that the dissipation energy in ferroelectric hysteresis loops and the dielectric loss in dielectric properties increase with the addition of conducting materials [16,17].…”

Section: Introductionmentioning

confidence: 99%

Piezoelectric Properties of PVDF Modified 3-3 Type Cement-Based Piezoelectric Composites

Liu

zhang

Cao

et al. 2020

Preprint

View full text Add to dashboard Cite

In this study, 3-3 type cement-based piezoelectric composites were prepared by casting Portland cement paste in porous lead zirconate titanate (PZT) ceramics, then the Polyvinylidene fluoride (PVDF) of N-Methylpyrrolidone (NMP) solvent with concentration of 50-200 mg/ml was utilized to modify the PZT-PC composites. The influence of PVDF concentration on the density, microstructure, dielectric, piezoelectric and electromechanical properties were investigated. The results indicate that the density of PZT-PC composites increased gradually with PVDF concentration for the increasing combined weight of PVDF with the composites. The introduction of PVDF has also contributed to the reduction of leakage current during the poling and testing process, which led to increased relative permittivity εr and longitudinal piezoelectric strain coefficient d33, while the dielectric loss tanδ and longitudinal piezoelectric voltage coefficient g33 demonstrated an opposite changing trend. Both the thickness electromechanical coupling coefficient Kt and planar electromechanical coupling coefficient Kp of the PZT-PC composites increased with PVDF concentration. The acoustic impedance (Z) of PVDF modified PZT-PC composites ranged from 6.89 to 7.65 MRayls, making it suitable for applications in the health monitoring of civil engineering.

show abstract

Solvent-assisted precipitation direct-write printing toward in-suit oriented β-phase polyvinylidene fluoride with tunable microarchitectures for energy harvesting and self-powered sensing

Jin

Lim

et al. 2022

Applied Materials Today

View full text Add to dashboard Cite

Effect of polyvinylidene fluoride on the fracture microstructure characteristics and piezoelectric and mechanical properties of 0-3 barium zirconate titanate ceramic-cement composites

Cited by 13 publications

References 28 publications

Cement-Based Piezoelectric Ceramic Composites for Sensing Elements: A Comprehensive State-of-the-Art Review

Cement-Based Piezoelectric Ceramic Composites for Sensing Elements: A Comprehensive State-of-the-Art Review

Piezoelectric Properties of PVDF Modified 3-3 Type Cement-Based Piezoelectric Composites

Solvent-assisted precipitation direct-write printing toward in-suit oriented β-phase polyvinylidene fluoride with tunable microarchitectures for energy harvesting and self-powered sensing

Contact Info

Product

Resources

About