Effect of Polymer Addition on the Structure and Hydrogen Evolution Reaction Property of Nanoflower-Like Molybdenum Disulfide

Abstract

Nano-structured molybdenum disulfide (MoS2) catalysts have been extensively developed for the hydrogen evolution reaction (HER). Herein, a novel hydrothermal intercalation approach is employed to fabricate nanoflower-like 2H-MoS2 with the incorporation of three polymers, polyvinylpyrrolidone (PVP), polyvinyl alcohol (PVA), and polyethylenimine (PEI). The as-prepared MoS2 specimens were characterized by techniques of scanning electron microscope (SEM), transmission electron microscopy (TEM), X-ray diffraction (XRD), together with Raman and Fourier transform infrared spectroscopy (FTIR). The HER properties of these lamellar nanoflower-like composites were evaluated using electrochemical tests of linear sweep voltammetry (LSV) and electrochemical impedance spectroscopy (EIS). The existent polymer enlarges the interlayer spacing of the lamellar MoS2, and reduces its stacked thickness. The lamellar MoS2 samples exhibit a promoting activity in HER at low additions of these three polymers (0.04 g/g MoS2 for PVA and PEI, and 0.08 g/g MoS2 for PVP). This can be attributed to the fact that the expanded interlayer of MoS2 can offer abundant exposed active sites for HER. Conversely, high additions of the polymers exert an obvious interference in the HER activity of the lamellar MoS2. Compared with the samples of MoS2/PVP-0.08 and MoS2/PEI-0.04, the MoS2/PVA-0.04 composite exhibits excellent activity in HER, in terms of higher current density and lower onset potential. OPEN ACCESSMetals 2015, 5 1830

The improved photocatalytic activity of highly expanded MoS2 under visible light emitting diodes

“…This indicated that the surface of the M, MF, MF-5, MF-3 and MF-1 is dominated by the terminated edges [23]. The frequency differences between E 1 2g and A 1 g peaks also provides information regarding the stacking layers [24,33]. The frequency differences between the E 1 2g and A 1 g peaks decreased gradually in the order of M > MF > MF-5 > MF-3 > MF-1.…”

Cold Sintering of a Covalently Bonded MoS2/Graphite Composite as a High Capacity Li–Ion Electrode

“…To overcome this limitation, we introduced ammonium molybdate tetrahydrate (AHM) and thiourea as a liquid sintering aid. It is to be noted that these chemistries are used as precursors to synthesize MoS 2 during solvothermal and hydrothermal synthesis . Figure a and b shows the SEM micrograph of a dense cold sintered MG pellet.…”

Hydrothermally Synthesized MoS2 Nanoclusters for Hydrogen Evolution Reaction

“…Here, Y o (mS•s) is coefficient of constant phase element, n is dimensionless CPE exponent related to angle of constant phase element, while R s and R ct are solution and charge transfer resistances, respectively as described earlier [26][27][28]. Based on CPE exponent (n0 .8), CPE shows capacitive nature and the calculated Helmholtz double layer capacitance of MoS 2 nanoclusters is found to be 0.203 mF.…”