Effect of Particle Trap on Motion Characteristics of Metal Particles in AC GILs and Parameter Optimization

Abstract

Metal particle contamination is an important reason for insulation failure of gas-insulated transmission lines (GILs). Particle trap is the common method for particle suppression. At present, research on the motion characteristics of metal particles near a particle trap and the optimization of trap parameters under AC voltage is insufficient. Based on that, firstly, a dynamic model of metal particles under AC voltage was established, and the motion characteristics of particles in front of the trap were studied, combined with experiments. Then, the influence of trap parameters on the capture effect was analyzed, and the optimization of the trap was realized by simulation. The results showed that, under AC voltage, the randomness of metal particle movement was strong, and the activity was low. The particles mainly moved away from the trap. Among the particles moving towards the trap, some stayed in front of the trap, and some fell into the trap from above. The thickness and height of the trap were the key parameters affecting the capture effect, and with the increase in height and thickness, the capture rate showed a trend of increasing first and then decreasing. The above conclusions can provide a reference for the optimization of a metal particle trap under AC voltage in engineering.

Study on the Capture Effect of Particle Trap in 1000 kV AC GIL

“…Recent studies on particle traps have mainly focused on studying their parameters and structural optimization. The literature [17] analyzed the motion characteristics of the particles located in front of the particle trap by simulation. The effect of trap parameters on the capture effect was investigated and the optimal thickness and height applicable to the trap with a grid structure were proposed.…”