Effect of Parameters on the Runoff Erosion Control Performance of Structurally Modified Jute and Coir Geomeshes over Loamy Sand

Abstract

Soil erosion is a serious environmental problem that can be controlled using bioengineering techniques. In using a bioengineering technique, temporary reinforcement is performed with geomeshes until vegetation takes root. In this study, structurally modified jute and coir geomeshes were tested for runoff erosion control and runoff volume over loamy sand at different slope angles. The laboratory results revealed that all parameters (slope angle, type of weave and type of material) had a significant effect on the erosion control performance of geomeshes. The slope angle contributed most (52.34%) to runoff erosion control, followed by weave type (25.79%) and type of material (12.28%). At lower and medium slope angles (of 15o and 30o, respectively) the twill-woven structure of coir geomeshes provided better erosion control than plain- and satin-woven structures, while plain-woven jute geomeshes demonstrated better erosion control at all slope angles. To understand the overall impact, a germination test was also conducted. According to the germination test results, the twill weave of jute geomeshes provided the highest rooting length. In general, plain-woven jute geomeshes are preferred for better erosion control on a high slope angle, while plain and twill can be used on a low slope angle.