Effect of Heat Treatment on Microstructure, Mechanical Properties, and Corrosion Performance of 410NiMo Super Martensitic Stainless Steel Cladded on 21CrMoV5-11 by Submerged Arc Welding Process

Abdian, K.; Eslami, A.; Ashrafizadeh, F.; Fadaeifard, Firouz; Hadizadeh, B.

doi:10.1007/s13369-023-07856-z

Cited by 2 publications

(1 citation statement)

References 23 publications

Supporting

Mentioning

Contrasting

Order By: Relevance

“…The welding processing parameters were used as follows: welding speed 50 cm min À1 , heat input 21 kJ cm À1 , voltage 32 V, and arc current 550 A. [28][29][30][31][32] Submerged arc welding wire H08MnMoA and flux SJ101S were selected for pipeline steel welding, as shown in Table 2. Pre-welding preheating and post-welding heat treatment were not used for welding.…”

Section: Methodsmentioning

confidence: 99%

Effect of Microstructure on Mechanical Properties of X65MS Welded Pipe Joint

Zhang,

Wei,

Wang

et al. 2024

steel research int.

View full text Add to dashboard Cite

The mechanical properties of welded joints have a crucial impact on the safety of pipelines. This article focuses on examining the correlation between the microstructure and mechanical properties of welded joints of X65MS pipeline steel for sour service. The results indicate that the welding thermal cycle forms the microstructure consisting of acicular ferrite, granular bainite, and polygonal ferrite. The hardness across the joint ranges from 210 and 270 HV, peaking within the welded zone and decreasing towards the base metal (BM). At −40 °C, the welded zone shows the lowest impact energy of 53 J, while heat‐affected zones exhibit superior impact toughness exceeding 270 J with the highest impact energy of 326 J. This can be attributed to the exceptionally fine‐grained microstructure, a small quantity of small‐sized martensite‐austenite (M/A) constituents in the heat affected zone. As for the low toughness of the weld, the main factors can be attributed to the presence of large‐sized elongated M/A constituents and inclusions.

show abstract

Section: Methodsmentioning

confidence: 99%