Effect of groove angle on the residual stress and deformation of nuclear waste container cylinder body welded by plasma arc welding

Abstract

As an important barrier for high‐level radioactive waste transportation and deep burial disposal, the welding quality of nuclear waste container is particularly important. At present, nuclear waste container is usually manufactured by plasma arc welding. Therefore, in order to manufacture nuclear waste container parts with high quality, based on the finite element simulation software simufact welding, this paper uses a combination of numerical simulation and experimental verification to simulate the temperature field, stress field and deformation of the longitudinal weld of 316L nuclear waste container cylinder body by selecting different welding groove angles. The test results show that the groove angle of the V‐groove increases, the residual stress distribution and size increase, and the deformation increases. The stress value of the I‐shaped groove is between the V‐shaped groove angle of 30° and 45°, but the deformation is the smallest. In practical engineering applications, residual stress and deformation need to be considered comprehensive. Reasonable groove angle plays an important role in controlling residual stress and deformation after welding.