Effect of Grain Size and Distribution on Mechanical Behavior of Dune Sand

Abstract

Sand is a major component of soils. It is widely used in manufacturing and construction. In geomechanics, one characterizes sand according to various aims. This paper investigates, for local sands, the effect of grain size and granular distribution on the mechanical behavior in terms of strength and stress-strain relationship. For this purpose, dune sands of the great Occidental Erg, from Algeria, are analyzed, according to the Mohr-Coulomb criterion. The study uses three kinds of sands. Every kind is divided into three sizes classes. Then, the experimental program conducts a set of direct shear tests, under various vertical stresses, using the small shear box (60 × 60 mm). The results show that the particle size and distribution have a direct effect on the mechanical behavior of the dune sand. Then, the dominant size class governs the natural sand behavior. Moreover, the peak shear strength increases as particle size increases. This indicates that there is an increase in peak friction angle with the increase of particles size and the sands consider as a purely cohesionless material. In addition, the experimental analysis shows that density and confinement stress is not sufficient to interpret the mechanical behavior. Indeed, mineralogy and surface state can influence the shear strength. These conclusions lead to the relevance of the sand genesis and the importance of the local materials thematic. Doi: 10.28991/cej-2021-03091730 Full Text: PDF

Comparison Behaviour of Dune Sand with Reference Sands Using Direct Shear Tests

“…When the normal stress is 100 kPa and 200 kPa the residual stress shows stability at large displacement. The peak shear strengths increase with the increase in applied normal stress that makes the sands denser in the higher normal stress, this is in agreement with the previous studies of dune sand (Boudia & Berga, 2021).…”

Co-valorization of Tuff and Sandy Residues in Roads Construction

“…The results of undrained monotonic triaxial compression tests obtained by Mahmoudi et al [21] indicate that the use of the global void ratio approach induces significant effects on the mechanical behavior, they showed that the plastic fines content up to the limit fines content seems to be a reliable parameter to be considered in the characterization of the mechanical response of sand and silt mixtures. Boudia et al [22] have treated the effect of grain size and granular distribution of local sands on the mechanical behavior in terms of strength and stress-strain relationship. Results show an increase in peak friction angle with the increase of particles size and they consider sands as a purely cohesive material.…”