Effect of Fractionation Process and Addition of Composite Crumb Rubber-Modified Asphalt on Road Performance Variability of Recycled Asphalt Mixtures with High Reclaimed Asphalt Pavement (RAP) Content

Abstract

The application of reclaimed asphalt pavement (RAP) can help reduce resource waste and environmental pollution in road construction. However, so far, only a small percentage of RAP materials can be used in road construction. The key obstacles to the application of a recycled asphalt mixture (RAM) with high RAP content are the variability of RAP materials and the difficulty of fully rejuvenating aged asphalt. However, there is still a lack of research on the effect of the variability of RAP materials and recycled asphalt on the quality control of a RAM. Therefore, this study investigates the effects of sieve pretreatment of RAP material using 4.75 mm sieve mesh and the use of composite crumb rubber-modified asphalt (CCRMA) to reclaim aged asphalt on the road performance and frame variability of reclaimed asphalt mixtures. Therefore, this study investigates the effects of the fractionation process of RAP material using 4.75 mm sieve mesh and the use of CCRMA to reclaim aged asphalt on the road performance of a RAM. The results show that the fractionation process can effectively reduce the mitigation of RAP agglomeration and reduce the variability of gradation, which in turn reduces the variability of road performance. The incorporation of CCRMA can effectively improve the high-temperature stability performance and low-temperature cracking resistance. The dynamic stability and the fracture energy of the CRAM (RAM prepared using CCRMA) were four and one and a half times as large as that of the NAM (RAM prepared using base asphalt), respectively. The fractionation process of RAP material and the utilization of CCRMA could help reduce the variability of the RAM while improving the road performance of the RAM.

Sustainable Pavement Construction in Sensitive Environments: Low-Energy Asphalt with Local Waste Materials and Geomaterials

“…Most of the recent previous studies concerning bituminous mixtures containing recycled geomaterials are focused on Reclaimed Asphalt Pavement (RAP) [12,13] or Recycled Concrete Aggregates (RCA) [14,15], but those using residual volcanic aggregates are very limited [16,17]. However, on average, more than 75% of volcanic rocks are scoriaceous and vesicular types which are likely to produce aggregates whose mechanical properties do not satisfy the standard technical requirements due to their extreme heterogeneity, porosity, alveolar structure, and absorption, as well as the non-cubic particle shape [18].…”