Effect of Chemical Treatment on Tensile Properties of Oil Palm Empty Fruit Bunch (OPEFB)-based All Cellulose Composite (ACC) Films

Abstract

This study explored the potential of using oil palm empty fruit bunch (OPEFB) in the production all-cellulose composite (ACC) films. The isolation process of the raw OPEFB fiber was carried out using chemical process to extract the OPEFB nanocellulose. The ACC films from the OPEFB and microcrystalline cellulose (MCC) were prepared using dimethylacetamide (DMAC) and lithium chloride solvent system whereby the partially dissolved cellulose was transformed into the matrix phase surrounding the remaining non-dissolved fiber. The ACC films containing 1, 2, 3 and 4 % (wt/vol) OPEFB cellulose and 3 % (wt/vol) microcrystalline cellulose (MCC) were prepared and the effects of 2-ethylhexyl acrylate chemical treatment of the OPEFB cellulose on tensile properties of the ACC film were investigated. Results indicate that the chemical treatment using 2-ethylhexyl acrylate has reduced the hydroxyl group composition in the cellulose and allowing greater dissolution of the cellulose during the formation of the ACC film. As a result, the tensile strength and modulus of elasticity of the ACC film were significantly enhanced. However, both untreated and treated ACC films experienced the reduction in both properties when the cellulose concentration was increased from 1 % to 4% (wt/vol), due to the saturation of the cellulose particles and non-homogeneity of the ACC system.

All-Cellulose Composite Laminates Made from Wood-Based Textiles: Effects of Process Conditions and the Addition of TEMPO-Oxidized Nanocellulose

“…In recent research on ACCs, the focus has often been on the development of multifunctional films [ 41 , 42 , 43 , 44 , 45 , 46 , 47 , 48 , 49 , 50 , 51 , 52 ]. However, more investigation is needed into constructive laminates, bulk materials, and how different raw material choices and process conditions play a part in the properties of structured materials.…”