Effect of Ceramic Waste Powder on Rutting and Dynamic Modulus of Asphalt Mixture

Abstract

Aggregates, asphalt binder, and mineral filler are blended in appropriate proportions to guarantee the desired characteristics of asphalt. Besides from aggregates and bitumen, the role of filler material in HMA is critical since it affects the mechanical characteristics and serviceability particularly when subjected to wheel load. The current research investigated the effect of Ceramic Waste Powder (CWP) used as filler in terms of rutting, and dynamic modulus of asphalt mixtures when used in different proportions 20%, 40%, 60%, 80% and 100% by weight of Marshall Specimen, and the results were compared to conventional mixture employing stone dust as a filler. The performance testing revealed that the rut resistance increases with the increase in CWP content from 40 % to 60 % in asphalt mixtures and showed 21 %, and 58 % decrease in rut depth value to that of conventional asphalt mixture at 55 ℃ respectively. While dynamic modulus increases as the frequency of the applied load increases from 0.1 Hz to 25 Hz and it decreases when the temperature of the dynamic modulus test increases from 4.4 °C to 54 °C. Higher values of Dynamic Modulus are observed at 21.1°C and 37.8 °C temperature for all frequencies. Therefore, using CWP as filler in asphalt not only increases the mechanical properties of HMA but also be a suitable approach towards reducing ceramic waste pollution.