Effect of Behavior Patch and Aging Adhesive Exposed with Temperature in Modeling of a Damaged and Repaired Plate in Aluminum (2024-T3)

Abstract

This work consists of the study is to analysis by the finite element method the effect of the ageing of the adhesive exposed simultaneously to the temperature and water on the degradation of its mechanical properties and consequently on the transfer of loads from the plate to patch. The stress intensity factor was evaluated according to immersion time and temperature. Several parameters have been taken into consideration, namely the properties of the composite patch, temperature, water absorption, rate and length of crack, the distribution of maximum shear stresses in the adhesive and peel in the patch were also analyzed.