Effect of Agro-Waste Ash on Mechanical Properties of Epoxy Polymer Concrete

Hoseinzadeh, M.

doi:10.5829/idosi.ijee.2013.04.03.15

Cited by 1 publication

(1 citation statement)

References 0 publications

Supporting

Mentioning

Contrasting

Order By: Relevance

“…The use of smaller filler sizes in polyester resin composites has been found to improve impact properties and strength due to the positive contribution of micro-fillers in the gaps between aggregate particles [ 16 , 17 ]. Although the use of powder fillers may enhance mechanical strength to a certain extent, excessive use of fillers beyond the desired value does not enhance the strength of polymer concrete [ 18 ].…”

Section: Introductionmentioning

confidence: 99%

Effect of Fly Ash on Mechanical Properties of Polymer Resin Grout

Fadiel,

Mohammed,

Rahman

et al. 2023

Biomimetics

View full text Add to dashboard Cite

High-strength grout is specified to increase the bond between grout and bar in grouted connections and to ensure that the forces in the bars can be transferred to the surrounding material accordingly. Although polymer grout is fast setting and rapid in strength development, the use of polymer mortar in grouted connections is still limited because of the lack of information and familiarity practitioners have regarding the product. The goal of this work is to investigate the mechanical characteristics and performance of polyester grout containing fly ash that can be used as an infill material for grouted connections. This study focused on the composition of polymer grout, which typically consists of a binder, hardener, and filler. In this particular case, the binder was made of unsaturated polyester resin and hardener, while the filler was fine sand. The aim of the research was to investigate the potential benefits of incorporating fly ash as an additional filler in polymer resin grout and examine the mechanical properties of polymer resin grout. To this end, varying amounts of fly ash were added to the mix, ranging from 0% to 32% of the total filler by volume, with a fixed polymer content of 40%. The performance of the resulting grout was evaluated through flowability, compression, and splitting tensile tests. The results of the experiments showed that, at a fly ash volume of 28%, the combination of fine sand and fly ash led to an improvement in grout strength; specifically, at this volume of fly ash, the compressive and tensile strengths increased by 24.7% and 124%, respectively, compared to the control mix. However, beyond a fly ash volume of 28%, the mechanical properties of the grout started to deteriorate. Due its superior properties in terms of compressive and flexural strengths over all examined mixes, the PRG-40-28 mix is ideal for use in the infill material for mechanical connections.

show abstract

Section: Introductionmentioning

confidence: 99%