Effect of aging treatment on Microstructure and properties of Al-Cu-Mg alloy

Abstract

In order to meet the demand for high strength of Al alloy in aerospace, automobile, shipbuilding and other fields, the effects of aging treatment on the microstructure and properties of Al-4.5Cu-0.8Mg alloy were systematically studied. The results show that the main strengthening phase in the microstructure of the alloy after aging was θ’ And S’ phase, the comprehensive mechanical properties of single-stage aging after aging at 165 °C for 12h was better. In the alloy aged at 185 °C for 12 hours, the strengthening phase was coarsen obviously, the tensile strength and yield strength was decrease greatly and showed obvious over aging characteristics. The comprehensive mechanical properties of two-stage aging at 105 °C / 12h + 165 °C / 5h was the best. The tensile strength, yield strength, elongation and hardness are 543 MPa and 374 MPa, 17.5% and 170.6 HV respectively.

Selective Laser Melting of Al-Cu-Mn-Mg Alloys: Processing and Mechanical Properties

“…The No. 8 specimen showed higher strength than the conventional as-cast Al-Cu-Mg alloys [26] and Al-Cu-Mg-Mn alloys [27,28]. This was due to the grain boundary strengthening and solid solution strengthening of elements such as Cu, Mg, and Mn.…”