Effect of Adding Al on the Phase Structure and Gettering Performance of TiZrV Non-Evaporable Getter Materials

Abstract

Titanium zirconium vanadium (TiZrV) is a widely used non-evaporable getter (NEG) material with the characteristics of a low activation temperature and a large gas absorption capacity. At present, the research on TiZrV getters mainly focuses on the thin-film state, with little research on the bulk state. In this paper, a TiZrV getter was optimized by adding Al, and the phase structure, activation properties, and gettering performance were studied. With the addition of Al, the α-Zr phase and Ti2Zr phase changed into the Ti-Zr phase and Al-Zr, Al-Ti phase. The newly generated phase promoted the diffusion of hydrogen and oxygen atoms. The activation temperature decreased significantly, as shown in the in situ XPS results. The H2 and CO gettering performance of TiZrVAl samples was promoted to 2073 cm3·s−1 and 1912.8 cm3·s−1, increased by 40.7% and 40.3%. This paper provides valuable ideas for optimizing the properties of bulk TiZrV getters.