Easy Fabrication of Ultrafiltration Membrane via Polyethersulfone-Fumed Silica

Abstract

This study investigated the effect of low-concentration fumed silica (FS) in polyethersulfone (PES) membranes. The PES/FS blend membrane was fabricated using a wet phase inversion technique as a flat sheet membrane. Scanning electron microscopy analysis revealed improved pore connectivity and rounder middle structures due to the addition of fumed silica. The experimental results indicated that the fabricated membranes fell within the ultrafiltration range, with pure water flux increasing as fumed silica concentration rose. The pure water flux improved by 64% compared to the native PES membrane. Furthermore, the blend membranes exhibited better selectivity, rejecting pepsin and lysozyme 11% and 19% more efficiently, respectively. Although the low concentration of fumed silica had minimal impact on the water contact angles of the membrane surface, all membranes demonstrated hydrophilicity. This cost-effective approach enhances permeability while maintaining separation characteristics, making it suitable for clean water applications.