“…Growth of the key markets for electrification of transport and energy is necessary to achieve the ambitious net-zero targets outlined by the government and its agency bodies. However, the rapid development and manufacture of the products will provide sustainability challenges [31] that will need to be overcome to ensure a sustainable long-term future for PMEMs.…”
Electrification is increasing in prevalence due to the importance placed on it for achieving global net zero targets. This has led to the proliferation of electrical mobility, including the wide-scale production of passenger vehicles, personal mobility devices and recent announcements regarding electrically powered aircraft, as well as in energy production. Electrical machines provide a cleaner source of energy during operation in comparison to their traditional fossil-based alternatives. The uncertainty and lack of transparency hanging over these green credentials can be attributed to how these products are manufactured and then disposed of at the end of their life. For them to be a truly sustainable solution, improvements need to be made across their entire life cycle. With the projected increase in their numbers due to the advancement of electrification, this current life cycle is not sustainable, directly opposing the intention of these products. This paper will introduce the current demand and challenges. It will also present these motors broken down into their constituent parts and follow each through their typical lifecycle. This paper presents the typical current life cycle of permanent magnet electrical machines, demonstrating the environmental issues associated with the current linear life cycle, and proposing alternative practices, to ease the environmental burden.
“…Growth of the key markets for electrification of transport and energy is necessary to achieve the ambitious net-zero targets outlined by the government and its agency bodies. However, the rapid development and manufacture of the products will provide sustainability challenges [31] that will need to be overcome to ensure a sustainable long-term future for PMEMs.…”
Electrification is increasing in prevalence due to the importance placed on it for achieving global net zero targets. This has led to the proliferation of electrical mobility, including the wide-scale production of passenger vehicles, personal mobility devices and recent announcements regarding electrically powered aircraft, as well as in energy production. Electrical machines provide a cleaner source of energy during operation in comparison to their traditional fossil-based alternatives. The uncertainty and lack of transparency hanging over these green credentials can be attributed to how these products are manufactured and then disposed of at the end of their life. For them to be a truly sustainable solution, improvements need to be made across their entire life cycle. With the projected increase in their numbers due to the advancement of electrification, this current life cycle is not sustainable, directly opposing the intention of these products. This paper will introduce the current demand and challenges. It will also present these motors broken down into their constituent parts and follow each through their typical lifecycle. This paper presents the typical current life cycle of permanent magnet electrical machines, demonstrating the environmental issues associated with the current linear life cycle, and proposing alternative practices, to ease the environmental burden.
“…Traditional active techniques, on the other hand, typically result in the forced circulation and circulation of particular cooling materials and substances, including water and air. The fundamental problem is that, in some cases, the cooling impact might be relatively restricted [26]. Lower operating temperatures, less energy use, and better system performance could all be affected by this.…”
The driving motor is one of the most crucial components of an electric vehicle (EV). The most commonly used type of motor in EVs is the induction motor. These motors generate heat during operation due to the flow of electrical current through the motor’s coils, as well as friction and other factors. For long-run and high efficiency of the motor, cooling becomes more important. This article utilized ANSYS Motor-CAD to map the temperature signature of an induction motor and investigated the thermal efficiency of using nanofluids as a cooling medium. The thermal conductivity of nanofluids has been found to be superior to that of more conventional cooling fluids such as air and water. This research explores the effect of using Al2O3, ZnO, and CuO concentrations in nanofluids (water as a base fluid) on the thermal efficacy and performance of motor. According to the findings, using nanofluids may considerably increase the efficiency of the motor, thereby lowering temperature rise and boosting system effectiveness. Based on the simulation analysis using ANSYS Motor-CAD, the results demonstrate that the utilization of CuO nanofluid as a cooling medium in the induction motor led to a reduction of 10% in the temperature of the motor housing. The maximum reduction in the temperature was found up to 10% when nanofluids were used, which confirms CuO as an excellent option of nanofluids for use as motor cooling and other applications where effective heat transmission is crucial.
“…In Ref. 13 , the transportation electrification market is also studied. On the other hand, from a power system standpoint, the planning of EV charging stations presents unique characteristics, wherein these stations function both as loads and storage units, further entwined with various road and user constraints.…”
This comprehensive review investigates the growing adoption of electric vehicles (EVs) as a practical solution for environmental concerns associated with fossil fuel usage in mobility. The increasing demand for EVs underscores the critical importance of establishing efficient, fast-charging infrastructure, especially from the standpoint of the electrical power grid. The review systematically examines the planning strategies and considerations for deploying electric vehicle fast charging stations. It emphasizes their unique dual role as loads and storage units, intricately linked to diverse road and user constraints. Furthermore, the review underscores the significant opportunity surrounding these stations for the integration of distributed renewable energy sources. It thoroughly explores the challenges and opportunities intrinsic to the planning and localization process, providing insights into the complexities associated with these multifaceted stations. Renewable resources, including wind and solar energy, are investigated for their potential in powering these charging stations, with a simultaneous exploration of energy storage systems to minimize environmental impact and boost sustainability. In addition to analyzing planning approaches, the review evaluates existing simulation models and optimization tools employed in designing and operating fast charging stations. The review consolidates key findings and offers recommendations to researchers and grid authorities, addressing critical research gaps arising from the escalating demand for electric vehicle fast-charging infrastructure. This synthesis is a valuable resource for advancing understanding and implementing robust strategies in integrating EVs with the electrical power grid.
scite is a Brooklyn-based organization that helps researchers better discover and understand research articles through Smart Citations–citations that display the context of the citation and describe whether the article provides supporting or contrasting evidence. scite is used by students and researchers from around the world and is funded in part by the National Science Foundation and the National Institute on Drug Abuse of the National Institutes of Health.