Dynamical effects of the impact of falling mass on stiffened rectangular plate

Abstract

In this paper, the effect of using the strengtheners on the stress and deflection under the effect of a certain weight falling on plates made of aluminum alloys (Al Mg3)has been studied. The study was carried on through two aspects; experimentally and theoretically; theoretically by using (F.E.M LS. DYNA) program. After comparing the theoretical aspect and experimental aspect, greatly-close results at point of contact were found out, as follows:When using one strengthener, the stresses reduce by (14 %) and the deflection by (70%) with comparison of without stiffener case .When using two strengtheners at the ends, stresses reduce (77%) and the deflection (65%) .When using two strengtheners 8 cm apart, stresses reduce (56 % ) and the deflection ( 18%) . When using two strengtheners 4 cm apart, stresses reduce (60 %) and the deflection (31%)